图片仅供参考,产品以实物为准
| 规格书 |
 TN Relays |
| 文档 |
Standards Chart Relay Technical Info How to Read Date Codes TN Relays Feb/2012 |
| 标准包装 | 50 |
| Relay 型 | General Purpose |
| Coil 型 | Non Latching |
| Coil 当前 | 15.5mA |
| Coil 电压 | 9VDC |
| Contact 形式 | DPDT (2 形式 C) |
| Contact Rating (当前 ) | 1A |
| Switching 电压 | 125VAC, 110VDC - Max |
| Turn On 电压 (Max) | 6.75 VDC |
| Turn Off 电压 (Min) | 0.9 VDC |
| 特点 | 密封 - Fully |
| 安装类型 | Through Hole |
| 终止 风格 | PC Pin |
| 包装材料 | Tube |
| Contact 材料 | Silver (Ag), Gold (Au) |
| 操作时间 | 3ms |
| 发布时间 | 3ms |
| 线圈通电 | 140 mW |
| 线圈电阻 | 579 Ohms |
| 操作温度 | -40°C ~ 70°C |
| 产品种类 | Low Signal Relays - PCB |
| RoHS | RoHS Compliant |
| 触点形式 | 2 Form C (DPDT-BM) |
| 触点额定电流 | 1 A |
| 线圈电压 | 9 VDC |
| 最大开关电流 | 1 A |
| 线圈电流 | 15.5 mA |
| 线圈类型 | Single Side Stable |
| 功耗 | 140 mW |
| 端接类型 | Quick Connect |
| 隔离 | 20 dB at 1 GHz |
| 插入损耗 | 1.4 dB at 1 GHz |
| 联系额定值 | 1 A at 30 VDC / 500 mA at 125 VAC |
| 封装 | Tube |
| 工厂包装数量 | 50 |
| 寿命 | Obsolete |
| 开启电压（最大值） | 6.75 VDC |
| 产品特点 | Sealed - Fully |
| 关闭电压（最小值） | 0.9 VDC |
| 线圈功率 | 140 mW |
| 继电器类型 | General Purpose |
| 切换电压 | 125VAC, 110VDC - Max |
| 释放时间 | 3ms |
| 工作温度 | -40°C ~ 70°C |
| 操作时间 | 3ms |
| 触点额定值（电流） | 1A |
| 标准包装 | 50 |
| 安装类型 | Through Hole |
| 触点材料 | Silver (Ag), Gold (Au) |
| 线圈电阻 | 579 Ohms |
| RoHS指令 | Lead free / RoHS Compliant |
| Expected life (minoperations) - Mechanical (at 180 cpm) | 10^8 |
| Min switching capacity | 10 ?A 10 mV DC |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Humidity | 5 to 85% R.H. |
| 操作功能 | Single Side Stable |
| 安装 | PC Board |
| Unit weight | Approx. 1.5 g .053 oz |
| Vibration resistance - Destructive | 294 m/s^2 {30G}, 10 to 55 Hz at double amplitude of 5 mm |
| 电流 | 1 Amp |
| Temperature rise (at 20C) | Max. 50°C |
| Vibration resistance - Functional | 176.4 m/s^2 {18G}, 10 to 55 Hz at double amplitude of 3 mm |
| Initial breakdown voltage - Between contact sets | 1,000 Vrms for 1 min. (Detection current: 10 mA) |
| Initial contact resistance, max (By voltage drop 6 V DC 1A ) | 60 mohm |
| Initial breakdown voltage - Between contact and coil | 1,000 Vrms for 1 min. (Detection current: 10 mA) |
| Coil resistance, (10%) | 579 ohm |
| Initial insulation resistance | Min. 1,000 Mohm (at 500 V DC) |
| Release time [Reset time] (at 20C) | Max. 3 ms (Approx. 1 ms) [Max. 3 ms (Approx. 2 ms)] |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Ambient temp | 40°C to +70°C, 40°F to +158°F |
| Drop-out voltage, (min) (initial) | 0.9 VDC |
| MainCategory | Relays |
| Initial breakdown voltage - Between open contacts | 750 Vrms for 1 min. (Detection current: 10 mA) |
| Max switching power (resistive load) | 30 W, 62.5 VA |
| Pick-up voltage, (max) (initial) | 6.75 VDC |
| Nominal switching capacity (resistive load) | 1 A 30 V DC, 0.5 A 125 V AC |
| Contact material | Gold-clad silver |
| SubCategory | Signal Relay |
| Nominal operating power | 140 mW (3 to 12 V DC), 200 mW (24 V DC), 300 mW (48 V DC) |
| Operate time [Set time] (at 20C) | Max. 3 ms (Approx. 2 ms) [Max. 3 ms (Approx. 2 ms)] |
| Max switching current | 1 A |
| 联系配置 | 2C DPDT |
| Max allowable voltage | 13.5 VDC |
| FCC surge voltage between open contacts | 1,500 V |
| Expected life (minoperations) - Electrical (at 20 cpm) | 1 A 30 V DC resistive load - 210^5, 0.5 A 125 V AC resistive load - 10^5 |
| Max switching voltage | 110 V DC,125 V AC |
| Nominal operating current, (10%) | 15.5 mA |
| Shock resistance - Functional | Min. 490 m/s^2 {50G} |
| Shock resistance - Destructive | Min. 980 m/s^2 {100G} |
TN2-H-9V也可以通过以下分类找到
TN2-H-9V相关搜索
咨询QQ
综合类：
热线电话
智能AI技术专家