芯天下
8705640000

点击放大查看

对参数有疑问?问 AI 助手

商业参数

标准包装规格1标准包装数量1

合规参数

RoHSLead free / RoHS Compliant标准DIN EN 50178
IEC 61000-4-2EN 55011, EN 61000-6, EN 61326标准编号30-21-18-01
符合性声明Declaration of Conformity

电气参数

精度< 0.3 % of set range频率27-37-18-01
指示器LED green = OK / LED yellow/red = alarm status隔离3-way isolator
迟滞24...70 V AC, small = 5 V / large = 10 V, 70–260 VAC, small = 8 V ⁄ large = 16量程(°/s)0.5 mm²
响应时间< 300 ms建立时间DIP switches: ON = 1,2,5,8 / OFF = 3,4,6,7
最大电压260 V AC / DC测试电流3 A
额定电压input/output, input/reset input, reset input/output: 300 V供电电压from the measuring circuit
开关电流8 A击穿电压2 kVeff
最小输入电压18 V DC交流开关电压250 V
冲击放电电流 (8/20µs)Input/output, input/reset input, reset input/output: 4 kV

机械参数

深度112.4 mm宽度17.5 mm
长度96.5 mm重量132 g
连接器类型Screw connection深度(英寸)4.425 inch
安装导轨TS 35宽度(英寸)0.689 inch
长度(英寸)3.799 inch包装数量instruction sheet.pdf

产品信息

类型WAS5 VMR 1ph系列*
ETIM 6*0EC002046功能Single-phase monitoring
GTIN(EAN)4032248377084描述Markers – refer to Accessories.
配置DIP switch, Potentiometer, Alarm status reset via reset input or button规格说明Limit-value monitoring component  for 1-phase AC / DC voltages with relay output and electrical isolationlimit-value monitoring component in 17.5 mm width for recording AC / DC voltages 24...70 V / 70...140 V / 140...210 V / 210...260 V. A relay contact (CO) with a switching capacity of 750 VA is available on the output side. Input ranges, high/low trip switching behaviour, hysteresis and memory behaviour can be configured using DIP switches. Switching threshold can be adjusted using the front-side potentiometer. The input circuit is used for the power supply. The memory function can be activated using an external reset input 18...30 VDC. The input/output/reset have 4 kV of electrical isolation.
固件版本WAVESERIES, Voltage monitoring, Screw connection其他规格III

环境参数

距离≥ 3 mmET(伏秒积)EC001438
工作寿命587 Years防护等级2
工作温度-10 °C...55 °C温度系数≤ 250 ppm/K