Panasonic Electric Works
所示图像仅为示意图。请从产品数据表中获得准确的规格。
| Type | Description |
|---|---|
| Operating Function | 2 Coil Latching |
| Min switching capacity | 10 ?A 1 mVDC |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Humidity | 5 to 85% R.H. |
| Coil resistance, (10%) Reset Coil | 129 ohm |
| Mounting | SMD |
| Max switching power | 0.1 W |
| Coil Voltage | 3 VDC |
| Vibration resistance - Destructive | 10 to 55 Hz at double amplitude of 5 mm |
| Current | 10 mAmps |
| Temperature rise (at 20C) | Max. 50°C |
| Expected life (minoperations) - Electrical (at 750 cpm) (10 mA 10 V DC resistive load) | 10^7 |
| Release time (without diode) [Reset time] (at 20C) | Max. 5 ms (Approx. 1.5 ms), [Max. 5 ms (Approx. 3 ms)] |
| Vibration resistance - Functional | 10 to 55 Hz at double amplitude of 3.3 mm |
| Initial breakdown voltage - Between contact sets | 1,000 Vrms for 1min. |
| Dynamic contact resistance (During initial and electric life tests) (By voltage drop of 20 mV 1 mA[1 kHz], Measurement delay 10 ms after applying nominal coil voltage) | Max. 1 ohm |
| Initial breakdown voltage - Between contact and coil | 1,000 Vrms for 1min. |
| Contact material | Gold-clad silver alloy |
| Initial insulation resistance | Min. 10,000M ohm (at 500V DC) |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Ambient temp | 40°C to 70°C, 40°F to 158°F |
| Coil resistance, (10%) Set Coil | 129 ohm |
| Nominal operating power Reset Coil | 70 mW |
| Drop-out voltage, (min) (initial) | 2.4 VDC |
| Packaging | Tape and reel packing |
| MainCategory | Relays |
| Initial breakdown voltage - Between open contacts | 750 Vrms for 1min. |
| Nominal operating power Set Coil | 70 mW |
| Pick-up voltage, (max) (initial) | 2.4 VDC |
| Expected life (minoperations) - Mechanical (at 750 cpm) | 5 10^7 |
| Nominal switching capacity (resistive load) | 10 mA 10 VDC |
| SubCategory | Signal Relay |
| Nominal operating power | 70mW (1.5 to 12 V DC) 150mW (24 V DC) |
| Operate time [Set time] (at 20C) | Max. 5 ms (Approx. 3 ms), [Max. 5 ms (Approx. 3 ms)] |
| Max switching current | 10 mA DC |
| Contact Configuration | 2C DPDT |
| Thermal electromotive force, max (at nominal voltage applied to the coil) | 3 ?V |
| Nominal operating current, (10%) Set Coil | 23.3 mA |
| Max allowable voltage | 4.5 VDC |
| Shock resistance - Functional | Min. 750 m/s^2{75G] |
| Static contact resistance (During initial and electric life tests) (By voltage drop of 20 mV 1 mA [1kHz]) | Max. 100 mohm |
| Max switching voltage | 10 VDC |
| Nominal operating current, (10%) Reset Coil | 23.3 mA |
| Shock resistance - Destructive | Min. 1,000 m/s^2{100G] |
咨询QQ
热线电话
