Panasonic Electric Works
所示图像仅为示意图。请从产品数据表中获得准确的规格。
| Type | Description |
|---|---|
| 产品种类 | Low Signal Relays - PCB |
| RoHS | RoHS Compliant By Exemption |
| 触点形式 | 2 Form C (DPDT-BM) |
| 触点额定电流 | 1 A |
| 线圈电压 | 12 VDC |
| 最大开关电流 | 1 A |
| 线圈电流 | 5.8 mA |
| 线圈类型 | Latching, 2 Coils |
| 功耗 | 70 mW |
| 端接类型 | Solder Terminal |
| 隔离 | 20 dB at 1 GHz |
| 插入损耗 | 0.8 dB at 1 GHz |
| 联系额定值 | 1 A at 30 VDC |
| 封装 | Tube |
| 工厂包装数量 | 40 |
| 继电器结构 | Latching Double Coil |
| 线圈抑制二极管 | No |
| 安装 | Through Hole |
| 最大额定电流 | 1 |
| 最大直流额定电压 | 110 |
| 类型 | Ultra High Sensitivity Relay |
| 线圈电流 | 5.8 |
| 触点形式 | DPDT |
| 推到测试按钮 | No |
| 包装类型 | DIP |
| 最低工作温度 | -40 |
| 产品长度 | 15 |
| 最高工作温度 | 70 |
| 最大额定功率 | 30W |
| 欧盟RoHS指令 | Compliant |
| 线圈电阻 | 2.057K |
| 操作时间 | 5 |
| DC Coil Voltage | 12 |
| 产品厚度 | 7.4 |
| 端子数 | 10 |
| 产品高度 | 8.2 |
| 密封 | Sealed |
| 最大吸合电压 | 9.6VDC |
| LED指示灯 | No |
| 触点材料 | Silver/Gold Clad |
| 开启电压（最大值） | 9.6 VDC |
| 产品特点 | Sealed - Fully |
| 线圈功率 | 70 mW |
| 继电器类型 | General Purpose |
| 切换电压 | 110VDC - Max |
| 释放时间 | 5ms |
| 工作温度 | -40°C ~ 70°C |
| 操作时间 | 5ms |
| 触点额定值（电流） | 1A |
| 标准包装 | 40 |
| 安装类型 | Through Hole |
| 线圈电阻 | 2.06 kOhms |
| RoHS指令 | Lead free / RoHS Compliant |
| 工作温度范围 | -40C to 70C |
| 吸合电压（最大值） | 9.6VDC |
| 引脚数 | 10 |
| 弧度硬化 | No |
| 安装风格 | Through Hole |
| 额定电压（ VDC ） | 110 V |
| 封装/外壳 | DIP |
| 产品长度（mm ） | 15 mm |
| 产品厚度（毫米） | 7.4 mm |
| 产品高度（mm ） | 8.2 mm |
| 线圈电压DC | 12V |
| 推到测试按钮 | No |
| Brand/Series | TX-SSeries |
| ContactForm | DPDT |
| CurrentRating | 1A |
| Current,Rating | 1A |
| Diameter,Mounting | 0.039in.Dia.(Hole) |
| DielectricRating | 1000MW@500VDC |
| 外形尺寸 | 0.591in.Lx0.291in.Wx0.323in.H |
| 功能 | Sensitive |
| Material,Contact | Gold-CladSilverAlloy |
| MountingType | PCB |
| NumberofPins | 10 |
| Power,Rating | 30W |
| RelayType | ElectroMechanical |
| 标准 | UL,CSA |
| Temperature,Operating,Maximum | 70°C |
| Temperature,Operating,Minimum | -40°C |
| 端子 | Solder |
| Voltage,Control | 12VDC |
| Voltage,Rating | 30VDC |
| Expected life (minoperations) - Mechanical (at 180 cpm) | 5x10^7 |
| Min switching capacity | 10 ?A 10 mV DC |
| Set voltage, (max) (initial) | 9.6 VDC |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Humidity | 5 to 85% R.H. |
| 操作功能 | 2 Coil Latching |
| Unit weight | Approx. 2 g .071 oz |
| Vibration resistance - Destructive | 10 to 55 Hz at double amplitude of 5 mm |
| 电流 | 1 Amp |
| Temperature rise (at 20C) | Max. 50°C |
| Vibration resistance - Functional | 10 to 55 Hz at double amplitude of 3.3 mm |
| Initial breakdown voltage - Between contact sets | 1,000 Vrms for 1min. |
| Initial contact resistance, max (By voltage drop 6 V DC 1A ) | 100 mohm |
| Initial breakdown voltage - Between contact and coil | 1,800 Vrms for 1min. |
| Coil resistance, (10%) | 2057 ohm |
| Initial insulation resistance | Min. 10,000M ohm (at 500V DC) |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Ambient temp | 40°C to +70°C, 40°F to +158°F |
| MainCategory | Relays |
| Initial breakdown voltage - Between open contacts | 750 Vrms for 1min. |
| Max switching power (resistive load) | 30 W (DC) |
| [Reset time] (at 20C)(at nominal voltage) | Max. 5 ms (Approx. 1.5 ms) [Max. 5 ms (Approx. 3 ms)] |
| Nominal switching capacity (resistive load) | 1 A 30 V DC |
| Contact material | Gold-clad silver alloy |
| SubCategory | Signal Relay |
| Nominal operating power | 70 mW (1.5 to 12 V DC), 150 mW (24 V DC) |
| Max switching current | 1 A |
| 联系配置 | 2C DPDT |
| Reset voltage,(max) (initial) | 9.6 VDC |
| Max allowable voltage | 18 VDC |
| Operate time [Set time] (at 20C)(at nominal voltage) | Max. 5 ms (Approx. 3 ms), [Max. 5 ms (Approx. 3 ms)] |
| Initial surge voltage - Between contacts and coil (210 ?s) | 2,500 V (Telcordia) |
| Expected life (minoperations) - Electrical (at 20 cpm) | 1 A 30 V DC resistive - 210^5 |
| Max switching voltage | 110 V DC |
| Nominal operating current, (10%) | 5.8 mA |
| Initial surge voltage - Between contacts, 10 160 ?s | 1,500V (FCC Part 68) |
| Shock resistance - Functional | Min. 750 m/s^2 {75 G} |
| Shock resistance - Destructive | Min. 1,000 m/s^2{100G] |
| 导通电压（最大值） | 9.6 VDC |
| 线圈类型 | Latching, Dual Coil |
| 继电器类型 | General Purpose |
| 开关电压 | 110VDC - Max |
| 特性 | Sealed - Fully |
| 线圈电压 | 12VDC |
| 释放时间 | 5ms |
| 额定接触（电流） | 1A |
| 接触点外形 | DPDT (2 Form C) |
| 线圈电流 | 5.8mA |
| 工作时间 | 5ms |
| 线圈功率 | 150mW |
| 安装类型 | PCB（印刷电路板）安装 |
| 端子类型 | 印刷电路板引脚 |
| 工作温度范围 | -40 → +70°C |
| 长度 | 15mm |
| 应用类型 | 电信 |
| 最大切换电压 直流 | 110V |
| 高度 | 8.2mm |
| 深度 | 7.4mm |
| 线圈电阻 | 2.057 kΩ |
| 寿命 | 50000000 次操作 |
| Board Level Components | Y |
| 最高工作温度 | +70°C |
| 最低工作温度 | -40°C |
| 最大切换电流 直流 | 1 A |
| 尺寸 | 15 x 7.4 x 8.2mm |
| 触点材料 | 镀金 |
| 功能 | 高触点可靠性，出色的抗浪涌性 |
| 电气寿命 | 200000 次操作 |
| 线圈对触点绝缘 | 1.8kV rms |
| 触点配置 | 双刀双掷 |
| 最大切换功率 直流 | 30 W |
| RESOURCE TYPE | LINK |
|---|---|
| Datasheets |
|
咨询QQ
热线电话
