所示图像仅为示意图。请从产品数据表中获得准确的规格。
| Type | Description |
|---|---|
| 产品种类 | Low Signal Relays - PCB |
| RoHS | RoHS Compliant |
| 触点形式 | 2 Form C (DPDT-BM) |
| 触点额定电流 | 1 A |
| 线圈电压 | 12 VDC |
| 最大开关电流 | 1 A |
| 线圈电流 | 8.3 mA |
| 线圈类型 | Latching, 1 Coil |
| 功耗 | 100 mW |
| 端接类型 | Solder Pad |
| 联系额定值 | 1 A at 30 VDC / 300 mA at 125 VAC |
| 封装 | Reel |
| 工厂包装数量 | 900 |
| 继电器结构 | Latching Single Coil |
| 线圈抑制二极管 | No |
| 安装 | Surface Mount |
| 最大额定电流 | 2 |
| 最大直流额定电压 | 110 |
| 类型 | General Purpose Relay |
| 线圈电流 | 8.3 |
| 触点形式 | DPDT |
| 推到测试按钮 | No |
| 最低工作温度 | -40 |
| 产品长度 | 10.6 |
| 最高工作温度 | 85 |
| 最大额定功率 | 30W|37.5VA |
| 欧盟RoHS指令 | Compliant |
| 线圈电阻 | 1.44K |
| Operate Time | 4 |
| 直流线圈电压 | 12 |
| 产品厚度 | 8.4 |
| 端子数 | 8 |
| 最大交流电压额定值 | 125 |
| 产品高度 | 5.4 |
| 密封 | Sealed |
| 最大吸合电压 | 9VDC |
| LED指示灯 | No |
| 触点材料 | Silver Palladium |
| 开启电压(最大值) | 9 VDC |
| 线圈功率 | 100 mW |
| 继电器类型 | Telecom |
| 切换电压 | 125VAC, 110VDC - Max |
| 释放时间 | 4ms |
| 工作温度 | -40°C ~ 85°C |
| 操作时间 | 4ms |
| 触点额定值(电流) | 2A |
| 标准包装 | 900 |
| 安装类型 | Surface Mount |
| 线圈电阻 | 1.44 kOhms |
| RoHS指令 | Lead free / RoHS Compliant |
| 操作功能 | 1 Coil Latching |
| Min switching capacity | 10 ?A 10 mV DC |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Humidity | 5 to 85% R.H. |
| Unit weight | Approx. 1 g .035 oz |
| Vibration resistance - Destructive | 10 to 55 Hz at double amplitude of 5 mm |
| 电流 | 1 Amp |
| Temperature rise (at 20C) | Max. 50°C |
| Release time (without diode) [Reset time] (at 20C) | Max. 4 ms (Approx. 1 ms), [Max. 4 ms (Approx. 2 ms)] |
| Vibration resistance - Functional | 10 to 55 Hz at double amplitude of 3.3 mm |
| Initial breakdown voltage - Between contact sets | 1,000 Vrms for 1min. |
| Initial contact resistance, max (By voltage drop 6 V DC 1A ) | 100 mohm |
| Set voltage, (max)(initial) | 6.75 VDC |
| Initial breakdown voltage - Between contact and coil | 1,500 Vrms for 1min. |
| Coil resistance, (10%) | 810 ohm |
| Initial insulation resistance | Min. 10,000M ohm (at 500V DC) |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Ambient temp | 40°C to 85°C, 40°F to 185°F |
| MainCategory | Relays |
| Initial breakdown voltage - Between open contacts | 750 Vrms for 1min. |
| Max switching power (resistive load) | 30 W, 37.5 V A |
| Expected life (minoperations) - Mechanical (at 750 cpm) | 5 10^7 |
| Nominal switching capacity (resistive load) | 1 A 30 V DC, 0.3 A 125 V AC |
| Contact material | Stationary: AgPd+Au clad Movable: AgPd |
| Initial surge voltage - Between open contacts (10160 ?s) | 1,500 V (FCC Part 68) |
| SubCategory | Signal Relay |
| Nominal operating power | 100mW (1.5 to 12 V DC), 120mW (24 V DC) |
| Operate time [Set time] (at 20C) | Max. 4 ms (Approx. 2 ms), [Max. 4 ms (Approx. 2 ms)] |
| Max switching current | 1 A |
| 联系配置 | 2C DPDT |
| Reset voltage, (max)(initial) | 6.75 VDC |
| Max allowable voltage | 13.5 VDC |
| Initial surge voltage - Between contacts and coil (210 ?s) | 2,500 V (Telcordia) |
| Expected life (minoperations) - Electrical (at 20 cpm) | 1 A 30 V DC resistive - 10^5, 0.3 A 125 V AC resistive - 10^5 |
| Max switching voltage | 110 V DC, 125 V AC |
| Nominal operating current, (10%) | 11.1 mA |
| Shock resistance - Functional | Min. 750 m/s^2{75G] |
| Shock resistance - Destructive | Min. 1,000 m/s^2{100G] |
咨询QQ
热线电话