Panasonic Electric Works
所示图像仅为示意图。请从产品数据表中获得准确的规格。
| Type | Description |
|---|---|
| 产品种类 | Low Signal Relays - PCB |
| RoHS | RoHS Compliant |
| 触点形式 | 2 Form C (DPDT-BM) |
| 触点额定电流 | 1 A |
| 线圈电压 | 6 VDC |
| 最大开关电流 | 1 A |
| 线圈电流 | 23.3 mA |
| 线圈类型 | Single Side Stable |
| 功耗 | 140 mW |
| 端接类型 | Solder Terminal |
| 联系额定值 | 1 A at 30 VDC / 300 mA at 125 VAC |
| 封装 | Tube |
| 工厂包装数量 | 50 |
| 开启电压（最大值） | 4.5 VDC |
| 关闭电压（最小值） | 0.6 VDC |
| 线圈功率 | 140 mW |
| 继电器类型 | Telecom |
| 切换电压 | 125VAC, 110VDC - Max |
| 释放时间 | 4ms |
| 工作温度 | -40°C ~ 85°C |
| 操作时间 | 4ms |
| 触点额定值（电流） | 2A |
| 标准包装 | 50 |
| 安装类型 | Through Hole |
| 触点材料 | Silver Palladium (AgPd), Gold (Au) |
| 线圈电阻 | 257 Ohms |
| RoHS指令 | Lead free / RoHS Compliant |
| 操作功能 | Single Side Stable |
| Min switching capacity | 10 ?A 10 mV DC |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Humidity | 5 to 85% R.H. |
| 安装 | PC Board |
| Unit weight | Approx. 1 g .035 oz |
| Vibration resistance - Destructive | 10 to 55 Hz at double amplitude of 5 mm |
| 电流 | 1 Amp |
| Temperature rise (at 20C) | Max. 50°C |
| Release time (without diode) [Reset time] (at 20C) | Max. 4 ms (Approx. 1 ms), [Max. 4 ms (Approx. 2 ms)] |
| Vibration resistance - Functional | 10 to 55 Hz at double amplitude of 3.3 mm |
| Initial breakdown voltage - Between contact sets | 1,000 Vrms for 1min. |
| Initial contact resistance, max (By voltage drop 6 V DC 1A ) | 100 mohm |
| Initial breakdown voltage - Between contact and coil | 1,500 Vrms for 1min. |
| Coil resistance, (10%) | 257 ohm |
| Initial insulation resistance | Min. 10,000M ohm (at 500V DC) |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Ambient temp | 40°C to 85°C, 40°F to 185°F |
| Drop-out voltage, (min) (initial) | 0.6 VDC |
| MainCategory | Relays |
| Initial breakdown voltage - Between open contacts | 750 Vrms for 1min. |
| Max switching power (resistive load) | 30 W, 37.5 V A |
| Pick-up voltage, (max) (initial) | 4.5 VDC |
| Expected life (minoperations) - Mechanical (at 750 cpm) | 5 10^7 |
| Nominal switching capacity (resistive load) | 1 A 30 V DC, 0.3 A 125 V AC |
| Contact material | Stationary: AgPd+Au clad Movable: AgPd |
| Initial surge voltage - Between open contacts (10160 ?s) | 1,500 V (FCC Part 68) |
| SubCategory | Signal Relay |
| Nominal operating power | 140mW (1.5 to 12 V DC), 230mW (24 V DC) |
| Operate time [Set time] (at 20C) | Max. 4 ms (Approx. 2 ms), [Max. 4 ms (Approx. 2 ms)] |
| Max switching current | 1 A |
| 联系配置 | 2C DPDT |
| Max allowable voltage | 9 VDC |
| Initial surge voltage - Between contacts and coil (210 ?s) | 2,500 V (Telcordia) |
| Expected life (minoperations) - Electrical (at 20 cpm) | 1 A 30 V DC resistive - 10^5, 0.3 A 125 V AC resistive - 10^5 |
| Max switching voltage | 110 V DC, 125 V AC |
| Nominal operating current, (10%) | 23.3 mA |
| Shock resistance - Functional | Min. 750 m/s^2{75G] |
| Shock resistance - Destructive | Min. 1,000 m/s^2{100G] |
| RESOURCE TYPE | LINK |
|---|---|
| Datasheets |
|
咨询QQ
热线电话
