microchip
所示图像仅为示意图。请从产品数据表中获得准确的规格。
| Type | Description |
|---|---|
| 包装 | 8PDIP |
| 每个芯片的通道数 | 2 |
| 类型 | General Purpose Amplifier |
| 典型增益带宽积 | 0.155 MHz |
| 典型的转换率 | 0.08@5.5V V/us |
| 轨至轨 | Rail to Rail Output |
| 最大输入失调电压 | 0.25@5.5V mV |
| 最大输入偏置电流 | 0.000001(Typ)@5.5V uA |
| 典型输入噪声电压密度 | 38@5.5V nV/rtHz |
| 最低CMRR | 75 dB |
| 最小单电源电压 | 2.5 V |
| 最大单电源电压 | 6 V |
| 安装 | Through Hole |
| 工作温度 | -40 to 85 °C |
| 典型的同相输入噪声电流密度 | 0.003@5.5V pA/rtHz |
| 典型电压增益 | 121 dB |
| 标准包装 | Rail / Tube |
| 制造商类型 | Micropower Amplifier |
| 典型的单电源电压 | 3|5 |
| 包装宽度 | 6.35 |
| PCB | 8 |
| 筛选等级 | Industrial |
| 最大输入偏置电流 | 0.000001(Typ)@5.5V |
| Minimum PSRR | 80 |
| 欧盟RoHS指令 | Compliant |
| 典型增益带宽积 | 0.155 |
| 典型电压增益 | 121 |
| 电源类型 | Single |
| 输出类型 | CMOS|Rail to Rail |
| 最低CMRR | 75 |
| 最低工作温度 | -40 |
| 供应商封装形式 | PDIP |
| 标准包装名称 | PDIP |
| 最高工作温度 | 85 |
| 最大单电源电压 | 6 |
| 关机支持 | No |
| 包装长度 | 9.27 |
| 引脚数 | 8 |
| Maximum Input Offset Current | 0.000001(Typ)@5.5V |
| 最大输入失调电压 | 0.25@5.5V |
| 最小单电源电压 | 2.5 |
| 包装高度 | 3.3 |
| 封装 | Tube |
| 典型的转换率 | 0.08@5.5V |
| 技术 | CMOS |
| 铅形状 | Through Hole |
| 单位包 | 60 |
| 最小起订量 | 400 |
| 电流 - 输出/通道 | 17mA |
| 放大器类型 | General Purpose |
| 安装类型 | Through Hole |
| 供应商设备封装 | 8-PDIP |
| 增益带宽积 | 155kHz |
| 电流 - 电源 | 18.7µA |
| Voltage - Supply, Single/Dual (±) | 2.5 V ~ 6 V |
| 封装/外壳 | 8-DIP (0.300", 7.62mm) |
| 压摆率 | 0.08 V/µs |
| 电流 - 输入偏压 | 1pA |
| 电压 - 输入偏移 | 250µV |
| 电路数 | 2 |
| 其他名称 | MCP607IP |
| RoHS指令 | Lead free / RoHS Compliant |
| 工作电源电压 | 2.5 V to 5.5 V |
| 工厂包装数量 | 60 |
| 产品种类 | Operational Amplifiers - Op Amps |
| 关机 | No Shutdown |
| 输出电流 | 17 mA |
| 共模抑制比 - 闵 | 75 dB |
| 安装风格 | Through Hole |
| 输入失调电压 | 250 uV |
| 通道数 | 2 Channel |
| 最低工作温度 | - 40 C |
| 最高工作温度 | + 85 C |
| 电源电流 | 25 uA |
| RoHS | RoHS Compliant |
| 输入偏置电流 - 最大 | 80 pA |
| 工作温度范围 | -40C to 85C |
| 包装类型 | PDIP |
| 元件数 | 2 |
| 共模抑制比 | 75 dB |
| 工作温度分类 | Industrial |
| Dual Supply Voltage (Typ) | Not Required V |
| 输入偏置电流 | 0.001 nA |
| 电源要求 | Single |
| Dual Supply Voltage (Min) | Not Required V |
| 铁/铁I / O类型 | Rail to Rail Output |
| 关机功能 | No |
| 弧度硬化 | No |
| 单电源电压（最小值） | 2.5 V |
| 单电源电压（最大值） | 6 V |
| 单电源电压（典型值） | 3/5 V |
| Dual Supply Voltage (Max) | Not Required V |
| 电源抑制比 | 80 dB |
| 电压增益（dB） | 121 dB |
| 单位增益带宽积 | 0.155MHz |
| Op Amp Type | :General Purpose |
| No. of Amplifiers | :2 |
| Supply Voltage Range | :2.5V to 6V |
| Amplifier Case Style | :DIP |
| No. of Pins | :8 |
| 带宽 | :155kHz |
| Operating Temperature Min | :-40°C |
| Operating Temperature Max | :125°C |
| MSL | :- |
| SVHC | :No SVHC (20-Jun-2013) |
| Weight (kg) | 0.0001 |
| Tariff No. | 85423190 |
| AmplifierType | GeneralPurpose,HighImpedance,LowOffsetVoltage,Micropower,Precision,Rail-to-Rail,SingleSupply |
| CommonModeRejectionRatio | 91dB |
| Current,InputBias | 80pA |
| Current,InputOffset | 1pA |
| Current,Output | ±30mA |
| Current,Supply | ±30mA |
| GainBandwidth | 155kHz |
| NumberofAmplifiers | Dual |
| NumberofCircuits | 2 |
| PackageType | PDIP-8 |
| SlewRate | 0.08V/μs |
| Temperature,Operating,Range | -40to+85°C |
| Voltage,Gain | 121dB |
| Voltage,Input | 2.2to2.8V |
| Voltage,Noise | 38nV/sqrtHz |
| Voltage,Offset | 250μV |
| Voltage,Offset,Input | 250μV |
| Voltage,Output,High | 2480mV |
| Voltage,Output,Low | 2480mV |
| Voltage,Supply | 2.5to6V |
| 案例 | DIP8 |
| Integrated circuits features | rail-to-rail output |
| Offset voltage | 250µV |
| Integrated circuit type | operational amplifier |
| Transmission band frequency | 155kHz |
| Gross weight | 1.21 g |
| Voltage rise speed | 80mV/μs |
| Number of channels | 2 |
| 电源电压 | 2.5...5.5V DC |
| Standby current | 25µA |
| 增益 | 115dB |
| spg | 54 |
| Collective package [pcs] | 54 |
| Multiplicity | 1 |
| RESOURCE TYPE | LINK |
|---|---|
| Datasheets |
|
咨询QQ
热线电话
