texas instruments
所示图像仅为示意图。请从产品数据表中获得准确的规格。
| Type | Description |
|---|---|
| 包装 | 28SOIC |
| 分辨率 | 10 Bit |
| 采样速率 | 30 Msps |
| 模拟量输入数 | 1 |
| 建筑 | Pipelined |
| 数字接口类型 | Parallel |
| 输入类型 | Voltage |
| 极性输入电压 | Unipolar |
| 信噪比 | 57(Typ) dB |
| 标准包装 | Rail / Tube |
| 产品种类 | Analog to Digital Converters - ADC |
| RoHS | RoHS Compliant |
| 通道数 | 1 |
| 转换速率 | 30 MSPs |
| 信噪比 | 57 dB |
| 接口类型 | Parallel |
| 工作电源电压 | 3 V to 5.5 V |
| 最高工作温度 | + 150 C |
| 安装风格 | SMD/SMT |
| 封装/外壳 | SOIC-28 Wide |
| 最大功率耗散 | 120 mW |
| 最低工作温度 | 0 C |
| 转换器数量 | 1 |
| 封装 | Tube |
| 系列 | THS1030 |
| 工厂包装数量 | 20 |
| 参考电压 | Internal, External |
| ADC的数量 | 1 |
| Typical Single Supply Voltage | 3.3 |
| 积分非线性误差 | ±2LSB |
| Package Width | 7.6(Max) |
| 最低工作温度 | -40 |
| 安装 | Surface Mount |
| PCB | 28 |
| 最大功率耗散 | 120 |
| 欧盟RoHS指令 | Compliant |
| 差分输入 | Yes |
| 电压电源 | Analog and Digital |
| 输入电压 | 2V |
| 供应商封装形式 | SOIC |
| 标准包装名称 | SOIC |
| 转换器类型 | General Purpose |
| 最高工作温度 | 85 |
| Maximum Single Supply Voltage | 5.5 |
| 输入信号类型 | Single-Ended|Differential |
| Package Length | 18.1(Max) |
| 引脚数 | 28 |
| Minimum Single Supply Voltage | 3 |
| Package Height | 2.35(Max) |
| 微分非线性 | ±1LSB |
| 铅形状 | Gull-wing |
| 位数 | 10 |
| 安装类型 | Surface Mount |
| 数据接口 | Parallel |
| 采样率（每秒） | 30M |
| 供应商设备封装 | 28-SOIC |
| 工作温度 | -40°C ~ 85°C |
| 输入数目和类型 | 1 Single-Ended, Unipolar |
| 其他名称 | 296-2826-5 |
| 封装/外壳 | 28-SOIC (0.295", 7.50mm Width) |
| RoHS指令 | Lead free / RoHS Compliant |
| 单位重量 | 0.025778 oz |
| 功率耗散 | 120 W |
| 工作温度范围 | -40C to 85C |
| 包装类型 | SOIC |
| Rated Input Volt | 2 |
| 元件数 | 1 |
| 采样速率 | 30000 KSPS |
| 工作温度分类 | Industrial |
| 输入极性 | Unipolar |
| Dual Supply Voltage (Typ) | Not Required V |
| 电源要求 | Analog and Digital |
| Dual Supply Voltage (Min) | Not Required V |
| 弧度硬化 | No |
| 单电源电压（最小值） | 3 V |
| 单电源电压（最大值） | 5.5 V |
| 单电源电压（典型值） | 3.3 V |
| Dual Supply Voltage (Max) | Not Required V |
| Differential Linearity Error | �1LSB |
| Status | OBSOLETE |
| Replaced By | ADS825E |
| Temp (oC) | -40 to 85 |
| Package | Pins | SOIC (DW) | 28 |
| Device Marking | View |
| Package QTY | Carrier | |
| New Flag | |
| Functional Diagram | |
| 功耗 | 150 |
| ENOB | 7.8 |
| HiRel | |
| Package Group | TSSOP |
| Analog Voltage AV/DD | 5.5 |
| 输入范围 | 2V (p-p) |
| Reference Design | |
| 接口 | Parallel CMOS |
| # Input Channels | 1 |
| 工作温度范围 | -40 to 85 0 to 70 |
| Reference Mode | Int Ext |
| Datasheet | SLAS243E |
| Digital Supply | 5.5 |
| 信纳比 | 48.6 |
| TI Design | |
| Rating | Catalog |
| INL | 2 |
| Analog Input BW | 150 |
| SFDR | 53 |
| DNL - Differential Nonlinearity | +/- 1 LSB |
| Analog Supply Voltage | 3 V to 5.5 V |
| Development Kit | THS1030EVM |
| SNR - Signal to Noise Ratio | 57 dB |
| 产品 | Analog to Digital Converters |
| 品牌 | Texas Instruments |
| ENOB - Effective Number of Bits | 7.8 Bit |
| 参考类型 | External, Internal |
| INL - Integral Nonlinearity | +/- 2 LSB |
| 长度 | 18 mm |
| 数字电源电压 | 3 V to 5.5 V |
| 身高 | 2.35 mm |
| Pd - Power Dissipation | 120 mW |
| RESOURCE TYPE | LINK |
|---|---|
| Datasheets |
|
咨询QQ
热线电话
