texas instruments
所示图像仅为示意图。请从产品数据表中获得准确的规格。
| Type | Description |
|---|---|
| 包装 | 28PDIP |
| 分辨率 | 12 Bit |
| 采样速率 | 40 ksps |
| ADC的数量 | 1 |
| 模拟量输入数 | 2 |
| 建筑 | SAR |
| 数字接口类型 | Parallel |
| 输入类型 | Voltage |
| 极性输入电压 | Unipolar|Bipolar |
| 信噪比 | 72(Typ) dB |
| 标准包装 | Rail / Tube |
| 产品种类 | Analog to Digital Converters - ADC |
| RoHS | RoHS Compliant |
| 通道数 | 1 |
| 转换速率 | 40 KSPs |
| 信噪比 | 72 dB |
| 接口类型 | Parallel |
| 工作电源电压 | 4.5 V to 5.5 V |
| 最高工作温度 | + 70 C |
| 安装风格 | Through Hole |
| 封装/外壳 | PDIP-28 |
| 最大功率耗散 | 100 mW |
| 最低工作温度 | 0 C |
| 转换器数量 | 1 |
| 封装 | Tube |
| 系列 | ADS574 |
| 工厂包装数量 | 13 |
| 参考电压 | 2.5 V |
| 典型的单电源电压 | 5 |
| 积分非线性误差 | ±1LSB |
| Package Width | 7.11(Max) |
| 最低工作温度 | 0 |
| 安装 | Through Hole |
| PCB | 28 |
| 最大功率耗散 | 100 |
| 欧盟RoHS指令 | Compliant |
| 差分输入 | No |
| 电压电源 | Single |
| 输入电压 | 10V/20V|±5V/±10V |
| 供应商封装形式 | PDIP |
| 标准包装名称 | PDIP |
| 转换器类型 | General Purpose |
| 最高工作温度 | 70 |
| Maximum Single Supply Voltage | 5.5 |
| 输入信号类型 | Single-Ended |
| Package Length | 36.2(Max) |
| 引脚数 | 28 |
| Minimum Single Supply Voltage | 4.5 |
| Package Height | 5.08(Max) - 0.51(Min) |
| 微分非线性 | ±1LSB |
| 铅形状 | Through Hole |
| 位数 | 12 |
| 安装类型 | Through Hole |
| 数据接口 | Parallel |
| 采样率（每秒） | 40k |
| 供应商设备封装 | 28-PDIP |
| 工作温度 | -40°C ~ 85°C |
| 输入数目和类型 | 2 Single-Ended, Unipolar; 2 Single-Ended, Bipolar |
| 封装/外壳 | 28-DIP (0.300", 7.62mm) |
| RoHS指令 | Lead free / RoHS Compliant |
| 单位重量 | 0.072798 oz |
| 功率耗散 | 100 W |
| 工作温度范围 | 0C to 70C |
| 包装类型 | PDIP |
| Rated Input Volt | 10/20/�5/�10 |
| 元件数 | 1 |
| 采样速率 | 40 KSPS |
| 工作温度分类 | Commercial |
| 输入极性 | Unipolar/Bipolar |
| Dual Supply Voltage (Typ) | Not Required V |
| 电源要求 | Single |
| Dual Supply Voltage (Min) | Not Required V |
| 弧度硬化 | No |
| 单电源电压（最小值） | 4.5 V |
| 单电源电压（最大值） | 5.5 V |
| 单电源电压（典型值） | 5 V |
| Dual Supply Voltage (Max) | Not Required V |
| Differential Linearity Error | �1LSB |
| 分辨率（位） | :12bit |
| Supply Voltage Type | :Single |
| Supply Voltage Min | :4.5V |
| Supply Voltage Max | :5.5V |
| 电源电流 | :13mA |
| Digital IC Case Style | :DIP |
| No. of Pins | :28 |
| Input Channel Type | :Single Ended |
| Operating Temperature Min | :0°C |
| Operating Temperature Max | :70°C |
| MSL | :MSL 1 - Unlimited |
| SVHC | :No SVHC (20-Jun-2013) |
| A/D / D/A Features | :CMOS, Internal Reference, Parallel, Successive Approximation |
| Base Number | :574 |
| Conversion Time | :25µs |
| IC Case Style | :DIP |
| IC Generic Number | :574 |
| IC Temperature Range | :Commercial |
| 线性误差 | :1% |
| Linearity Error ADC / DAC + | :1LSB |
| Linearity Error ADC / DAC - | :1LSB |
| Logic Function Number | :574 |
| No. of Bits | :12 |
| No. of Channels | :1 |
| 工作温度范围 | :0°C to +70°C |
| Power Dissipation Ptot Max | :100mW |
| Supply Voltage Range | :4.5V to 5.5V |
| Supply Voltage Range - Analogue | :-16.5V to 5.5V, 4.5V to 5.5V |
| 端接类型 | :Through Hole |
| Weight (kg) | 0.006667 |
| Tariff No. | 85423190 |
| Status | LIFEBUY |
| Replaced By | |
| Package | Pins | (NT) | 28 |
| Device Marking | View |
| Package QTY | Carrier | 13 | TUBE |
| New Flag | |
| Functional Diagram | fbd_sbas009.gif |
| 功耗 | 65 |
| ENOB | |
| HiRel | |
| Package Group | PDIP |
| Analog Voltage AV/DD | 5.5 |
| 输入范围 | |
| Reference Design | |
| 接口 | Parallel |
| # Input Channels | 1 |
| Reference Mode | Ext Int |
| Datasheet | SBAS009 |
| Digital Supply | 5.5 |
| 信纳比 | 71 |
| TI Design | |
| Rating | Catalog |
| INL | 0.5 |
| Analog Input BW | |
| SFDR |
| RESOURCE TYPE | LINK |
|---|---|
| Datasheets |
|
咨询QQ
热线电话
