texas instruments
所示图像仅为示意图。请从产品数据表中获得准确的规格。
| Type | Description |
|---|---|
| 包装 | 80HTQFP EP |
| 分辨率 | 12 Bit |
| 采样速率 | 550 Msps |
| 模拟量输入数 | 1 |
| 建筑 | Pipelined |
| 数字接口类型 | Parallel|LVDS |
| 输入类型 | Voltage |
| 信噪比 | 62.6(Typ) dBFS |
| 采样和保持 | Yes |
| 标准包装 | Tape & Reel |
| ADC的数量 | 1 |
| 典型的单电源电压 | 3.3/5 |
| 积分非线性误差 | ±4.5LSB |
| 最低工作温度 | -40 |
| 安装 | Surface Mount |
| Package Width | 12 |
| PCB | 80 |
| 筛选等级 | Industrial |
| 最大功率耗散 | 2500 |
| 欧盟RoHS指令 | Compliant |
| 差分输入 | Yes |
| 电压电源 | Single |
| 输入电压 | 2.2Vp-p |
| 供应商封装形式 | HTQFP EP |
| 标准包装名称 | QFP |
| 转换器类型 | General Purpose |
| 最高工作温度 | 85 |
| 最大单电源电压 | 3.6/5.25 |
| 输入信号类型 | Differential |
| Package Length | 12 |
| 引脚数 | 80 |
| 最小单电源电压 | 3/4.75 |
| Package Height | 1 |
| 微分非线性 | ±0.95LSB |
| 封装 | Tape and Reel |
| 参考电压 | Internal|External |
| 铅形状 | Gull-wing |
| 位数 | 12 |
| 安装类型 | Surface Mount |
| 数据接口 | LVDS |
| 采样率（每秒） | 550M |
| 供应商设备封装 | 80-HTQFP (12x12) |
| 工作温度 | -40°C ~ 85°C |
| 输入数目和类型 | 1 Differential |
| 转换器数量 | 1 |
| 封装/外壳 | 80-TQFP Exposed Pad |
| RoHS指令 | Lead free / RoHS Compliant |
| 工厂包装数量 | 1000 |
| 封装/外壳 | HTQFP EP |
| 工作电源电压 | 3.3 V, 5 V |
| 产品种类 | Analog to Digital Converters - ADC |
| 单位重量 | 0.012984 oz |
| 通道数 | 1 Channel |
| 最高工作温度 | + 85 C |
| RoHS | RoHS Compliant |
| 转换速率 | 550000 KSPs |
| 最大功率耗散 | 2500 mW |
| 系列 | ADS54RF63 |
| 安装风格 | SMD/SMT |
| 信噪比 | 62.6 dB |
| 最低工作温度 | - 40 C |
| 接口类型 | LVDS, Parallel |
| 功率耗散 | 2500 W |
| 工作温度范围 | -40C to 85C |
| 包装类型 | HTQFP EP |
| Rated Input Volt | �1.1 |
| 元件数 | 1 |
| 采样速率 | 550000 KSPS |
| 工作温度分类 | Industrial |
| 输入极性 | Bipolar |
| Dual Supply Voltage (Typ) | Not Required V |
| 电源要求 | Single |
| Dual Supply Voltage (Min) | Not Required V |
| 弧度硬化 | No |
| 单电源电压（最小值） | 3/4.75 V |
| 单电源电压（最大值） | 3.6/5.25 V |
| 单电源电压（典型值） | 3.3/5 V |
| Dual Supply Voltage (Max) | Not Required V |
| Differential Linearity Error | �0.95LSB |
| Status | ACTIVE |
| Temp (oC) | -40 to 85 |
| Package | Pins | HTQFP (PFP) | 80 |
| Device Marking | View |
| Package QTY | Carrier | 1000 | LARGE T&R |
| New Flag | |
| Functional Diagram | |
| 功耗 | 2250 |
| ENOB | 9.9 |
| HiRel | |
| Package Group | HTQFP |
| Analog Voltage AV/DD | 5.25 |
| 输入范围 | 2.2 (p-p) |
| Reference Design | |
| 接口 | Parallel LVDS |
| # Input Channels | 1 |
| 工作温度范围 | -40 to 85 |
| Reference Mode | Ext Int |
| Datasheet | SLAS515E |
| Digital Supply | 3.6 |
| 信纳比 | 61.3 |
| TI Design | |
| Rating | Catalog |
| INL | 2.5 |
| Analog Input BW | 2300 |
| SFDR | 76 |
| DNL - Differential Nonlinearity | +/- 0.95 LSB |
| Analog Supply Voltage | 4.75 V to 5.25 V |
| Development Kit | ADS54RF63-ADX4 |
| 产品 | Analog to Digital Converters |
| 品牌 | Texas Instruments |
| 输出类型 | LVDS |
| SNR - Signal to Noise Ratio | 62.6 dB |
| 数字电源电压 | 3 V to 3.6 V |
| 参考类型 | External, Internal |
| INL - Integral Nonlinearity | +/- 4.5 LSB |
| 长度 | 12 mm |
| ENOB - Effective Number of Bits | 9.9 Bit |
| 身高 | 1 mm |
| Pd - Power Dissipation | 2.5 W |
| RESOURCE TYPE | LINK |
|---|---|
| Datasheets |
|
咨询QQ
热线电话
