LUCL1 electric motors, motor controllers & peripheral 系列
Schneider Electric SE适用于各种电压和电流应用的多功能磁控单元
施耐德电气的LUCL1系列包括适用于广泛工业和商业应用的电动机、电机控制器及外围组件。这些单元特别灵活，支持多种电压和电流要求，使其适合需要灵活性和可靠性能的项目。
如果您正在处理涉及暖通空调系统、输送带或需要精确控制速度和扭矩的应用项目，施耐德电气的LUCL1系列是一个不错的选择。值得注意的是，这些电机与施耐德电气的EcoStruxure平台集成良好，可以通过数字工具轻松监控和管理。当工程师们需要一种能够应对不同负载条件并保持高效率的可靠解决方案时，往往会选择这一系列。
另一个实用的观察是安装和维护的便捷性。LUCL1组件的模块化设计意味着更换部件或升级系统可以无需长时间停机，这对于工业环境中至关重要的连续运行时间来说是一项显著优势。总体而言，LUCL1系列提供了性能和灵活性的良好平衡，使其成为许多工程师解决各种电机控制挑战的首选方案。
系列图片（12 张）
文档与媒体
常见问答
内容由 AI 生成，仅供参考
加载中...
03
LUCL1 electric motors, motor controllers & peripheral - 型号列表
共 12 个型号| 制造商零件编号 | 库存 | 价格 | 产品类别 | 标准 | 认证 | 复位 | 电路 | 负载类型 | 复位时间 | 跳闸范围 | 额定功率 | I/O电压 | 额定输出功率 | 额定电压 | 输出电流 | 供电电压 | 最大功耗 | 击穿电压（V(BR)GSS） | 阻抗 - 不平衡/平衡 | 滑臂电阻（欧姆）（典型） | ESR（等效串联电阻） | 共模瞬态抗扰度（最小） | 重量 | 安装类型 | 绝缘直径 | 类型 | 用途 | 功能 | 语言 | 产品子类型 | 兼容性 | 显示格式 | 测量范围 | 设备简称 | 控制/显示类型 | 其他规格 | 应用细节 | 动作时间 | 抗冲击能力 | 存储接口 | 防护等级 | 工作压力 | 防护处理 | 抗振性 | 工作温度 | 自然散热热阻 | 最大额定电流 | 集电极-发射极击穿电压（最大） | 系列 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Magnetic Control Unit,24Vdc,1.4A Schneider Electric component LUCL1XBL: magnetic control unit LUCL 0.35...1.4 A - 24 V - DC Schneider Electric TeSys U-Line 系列 0.25 kW 磁控制单元 , 24 V 直流, 0.35 → 1.4 A Schneider Electric | 10 | 1: ¥560.59 | - | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | CE | Automatic reset - setting: setting rangeManual - setting: factory settingManual - setting: setting rangeRemote reset - setting: setting range | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 3-phase motor - cooling: self-cooled - setting factory settingSingle-phase motor | 120 s - reset manual - setting factory setting1...1000 s - reset manual or automatic reset - setting settable | 14.2 x Ir +/- 20 % | 0.25 kW | 70 % 500 ms conforming to IEC 61000-4-11 | 0.25 kW at < 400...415 V AC 50/60 Hz | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | 130 mA at 24 V DC I maximum while closing with LUB12220 mA at 24 V DC I maximum while closing with LUB3260 mA at 24 V DC I rms sealed with LUB1280 mA at 24 V DC I rms sealed with LUB32 | 14.5 V for DC circuit 24 V drop-out20...27 V for DC circuit 24 V in operation | 2 W for control circuit with LUB123 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 0.135 kg | Plug-in | 10 V conforming to IEC 61000-4-6 | Magnetic Control Unit | AC-41AC-43AC-44 | Manual resetShort-circuit protection | English - setting factory settingEnglish, French, German, Italian, Spanish - setting settable | Magnetic control unit | ASILUFC5ASILUFC51LUFC00LULC031LULC033LULC07LULC08LULC09LULC15 | Average current - setting factory settingAverage current - setting settableCause of last 5 faults - setting settableCurrent in phase - setting settableEarth leakage current - setting settablePhase imbalance - setting settableThermal state of motor - setting settable | TeSys U | LUCL | 24 V dc | 0.35 → 1.4 A | Protection of variable speed drive or soft startsoft stop unit | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit50 ms closing with LUB12 for control circuit50 ms closing with LUB32 for control circuit60 ms closing with LUB12 for control circuit60 ms closing with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | -40...85 °C | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | 2000 m | TH conforming to IEC 60068 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | 0.35...1.4 A | 0.35 → 1.4 A | 24 V 直流 | U-Line |
Magnetic Control Unit,110-240V,1.4A Schneider Electric component LUCL1XFU: magnetic control unit LUCL 0.35...1.4 A - 110..220 V - DC/AC Schneider Electric | 143 | 1: ¥408.7956 | - | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | CE | Automatic reset - setting: setting rangeManual - setting: factory settingManual - setting: setting rangeRemote reset - setting: setting range | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 3-phase motor - cooling: self-cooled - setting factory settingSingle-phase motor | 120 s - reset manual - setting factory setting1...1000 s - reset manual or automatic reset - setting settable | 14.2 x Ir +/- 20 % | 0.25 kW | 70 % 500 ms conforming to IEC 61000-4-11 | 0.25 kW at < 400...415 V AC 50/60 Hz | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | 25 mA at 110...220 V DC I rms sealed with LUB3225 mA at 110...240 V AC I rms sealed with LUB32280 mA at 110...220 V DC I maximum while closing with LUB12280 mA at 110...220 V DC I maximum while closing with LUB32280 mA at 110...240 V AC I maximum while closing with LUB12280 mA at 110...240 V AC I maximum while closing with LUB3235 mA at 110...220 V DC I rms sealed with LUB1235 mA at 110...240 V AC I rms sealed with LUB12 | 55 V for AC circuit 110...240 V drop-out55 V for DC circuit 110...240 V drop-out88...242 V for DC circuit 110...240 V in operation88...264 V for AC circuit 110...240 V in operation | 2 W for control circuit with LUB123 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 0.135 kg | Plug-in | 10 V conforming to IEC 61000-4-6 | Magnetic Control Unit | AC-41AC-43AC-44 | Manual resetShort-circuit protection | English - setting factory settingEnglish, French, German, Italian, Spanish - setting settable | Magnetic control unit | ASILUFC5ASILUFC51LUFC00LULC031LULC033LULC07LULC08LULC09LULC15 | Average current - setting factory settingAverage current - setting settableCause of last 5 faults - setting settableCurrent in phase - setting settableEarth leakage current - setting settablePhase imbalance - setting settableThermal state of motor - setting settable | TeSys U | LUCL | 110 → 220 V dc, 110 → 240 V ac | 0.35 → 1.4 A | Protection of variable speed drive or soft startsoft stop unit | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit50 ms closing with LUB12 for control circuit50 ms closing with LUB32 for control circuit60 ms closing with LUB12 for control circuit60 ms closing with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | -40...85 °C | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | 2000 m | TH conforming to IEC 60068 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | 0.35...1.4 A | - | - | - |
Magnetic Control Unit,24Vdc,12A Schneider Electric component LUCL12BL: magnetic control unit LUCL 3...12 A - 24 V - DC Schneider Electric TeSys U-Line 系列 9 kW 磁控制单元 , 24 V 直流, 3 → 12 A Schneider Electric | 10 | 1: ¥641.07 | - | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | CE | Automatic reset - setting: setting rangeManual - setting: factory settingManual - setting: setting rangeRemote reset - setting: setting range | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 3-phase motor - cooling: self-cooled - setting factory settingSingle-phase motor | 120 s - reset manual - setting factory setting1...1000 s - reset manual or automatic reset - setting settable | 14.2 x Ir +/- 20 % | 9 kW | 70 % 500 ms conforming to IEC 61000-4-11 | 9 kW at 690 V AC 50/60 Hz5.5 kW at 500 V AC 50/60 Hz5.5 kW at < 400...415 V AC 50/60 Hz | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | 130 mA at 24 V DC I maximum while closing with LUB12220 mA at 24 V DC I maximum while closing with LUB3260 mA at 24 V DC I rms sealed with LUB1280 mA at 24 V DC I rms sealed with LUB32 | 14.5 V for DC circuit 24 V drop-out20...27 V for DC circuit 24 V in operation | 2 W for control circuit with LUB123 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 0.135 kg | Plug-in | 10 V conforming to IEC 61000-4-6 | Magnetic Control Unit | AC-41AC-43AC-44 | Manual resetShort-circuit protection | English - setting factory settingEnglish, French, German, Italian, Spanish - setting settable | Magnetic control unit | ASILUFC5ASILUFC51LUFC00LULC031LULC033LULC07LULC08LULC09LULC15 | Average current - setting factory settingAverage current - setting settableCause of last 5 faults - setting settableCurrent in phase - setting settableEarth leakage current - setting settablePhase imbalance - setting settableThermal state of motor - setting settable | TeSys U | LUCL | 24 V dc | 3 → 12 A | Protection of variable speed drive or soft startsoft stop unit | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit50 ms closing with LUB12 for control circuit50 ms closing with LUB32 for control circuit60 ms closing with LUB12 for control circuit60 ms closing with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | -40...85 °C | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | 2000 m | TH conforming to IEC 60068 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | 3...12 A | 3 → 12 A | 24 V 直流 | U-Line |
Magnetic Control Unit,48-72,12A Schneider Electric component LUCL12ES: magnetic control unit LUCL 3...12 A - 48â Schneider Electric TeSys U-Line 系列 9 kW 磁控制单元 , 48 V 交流，48 → 72 V 直流, 3 → 12 A Schneider Electric | 133 | 1: ¥438.4708 | - | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | CE | Automatic reset - setting: setting rangeManual - setting: factory settingManual - setting: setting rangeRemote reset - setting: setting range | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 3-phase motor - cooling: self-cooled - setting factory settingSingle-phase motor | 120 s - reset manual - setting factory setting1...1000 s - reset manual or automatic reset - setting settable | 14.2 x Ir +/- 20 % | 9 kW | 70 % 500 ms conforming to IEC 61000-4-11 | 9 kW at 690 V AC 50/60 Hz5.5 kW at 500 V AC 50/60 Hz5.5 kW at < 400...415 V AC 50/60 Hz | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | 280 mA at 48...72 V AC I maximum while closing with LUB12280 mA at 48...72 V AC I maximum while closing with LUB32280 mA at 48...72 V DC I maximum while closing with LUB12280 mA at 48...72 V DC I maximum while closing with LUB3235 mA at 48...72 V AC I rms sealed with LUB1235 mA at 48...72 V DC I rms sealed with LUB1245 mA at 48...72 V AC I rms sealed with LUB3245 mA at 48...72 V DC I rms sealed with LUB32 | 29 V for AC circuit 48...72 V drop-out29 V for DC circuit 48...72 V drop-out38.5...72 V for AC circuit 48...72 V in operation38.5...93 V for DC circuit 48...72 V in operation | 2 W for control circuit with LUB123 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 0.135 kg | Plug-in | 10 V conforming to IEC 61000-4-6 | Magnetic Control Unit | AC-41AC-43AC-44 | Manual resetShort-circuit protection | English - setting factory settingEnglish, French, German, Italian, Spanish - setting settable | Magnetic control unit | ASILUFC5ASILUFC51LUFC00LULC031LULC033LULC07LULC08LULC09LULC15 | Average current - setting factory settingAverage current - setting settableCause of last 5 faults - setting settableCurrent in phase - setting settableEarth leakage current - setting settablePhase imbalance - setting settableThermal state of motor - setting settable | TeSys U | LUCL | 48 V ac, 48 → 72 V dc | 3 → 12 A | Protection of variable speed drive or soft startsoft stop unit | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit50 ms closing with LUB12 for control circuit50 ms closing with LUB32 for control circuit60 ms closing with LUB12 for control circuit60 ms closing with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | -40...85 °C | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | 2000 m | TH conforming to IEC 60068 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | 3...12 A | 3 → 12 A | 48 V 交流，48 → 72 V 直流 | U-Line |
Magnetic Control Unit,24Vdc,18A Schneider Electric component LUCL18BL: magnetic control unit LUCL 4.5...18 A - 24 V - DC Schneider Electric TeSys U-Line 系列 15 kW 磁控制单元 , 24 V 直流, 4.5 → 18 A Schneider Electric | 10 | 1: ¥691.91 | - | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | CE | Automatic reset - setting: setting rangeManual - setting: factory settingManual - setting: setting rangeRemote reset - setting: setting range | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 3-phase motor - cooling: self-cooled - setting factory settingSingle-phase motor | 120 s - reset manual - setting factory setting1...1000 s - reset manual or automatic reset - setting settable | 14.2 x Ir +/- 20 % | 15 kW | 70 % 500 ms conforming to IEC 61000-4-11 | 15 kW at 690 V AC 50/60 Hz9 kW at 500 V AC 50/60 Hz7.5 kW at < 400...415 V AC 50/60 Hz | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | 130 mA at 24 V DC I maximum while closing with LUB12220 mA at 24 V DC I maximum while closing with LUB3260 mA at 24 V DC I rms sealed with LUB1280 mA at 24 V DC I rms sealed with LUB32 | 14.5 V for DC circuit 24 V drop-out20...27 V for DC circuit 24 V in operation | 2 W for control circuit with LUB123 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 0.135 kg | Plug-in | 10 V conforming to IEC 61000-4-6 | Magnetic Control Unit | AC-41AC-43AC-44 | Manual resetShort-circuit protection | English - setting factory settingEnglish, French, German, Italian, Spanish - setting settable | Magnetic control unit | ASILUFC5ASILUFC51LUFC00LULC031LULC033LULC07LULC08LULC09LULC15 | Average current - setting factory settingAverage current - setting settableCause of last 5 faults - setting settableCurrent in phase - setting settableEarth leakage current - setting settablePhase imbalance - setting settableThermal state of motor - setting settable | TeSys U | LUCL | 24 V dc | 4.5 → 18 A | Protection of variable speed drive or soft startsoft stop unit | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit50 ms closing with LUB12 for control circuit50 ms closing with LUB32 for control circuit60 ms closing with LUB12 for control circuit60 ms closing with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | -40...85 °C | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | 2000 m | TH conforming to IEC 60068 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | 4.5...18 A | 4.5 → 18 A | 24 V 直流 | U-Line |
Magnetic Control Unit,24Vac,18A Schneider Electric component LUCL18B: magnetic control unit LUCL 4.5...18 A - 24 V - AC Schneider Electric | 116 | 1: ¥504.6348 | - | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | CE | Automatic reset - setting: setting rangeManual - setting: factory settingManual - setting: setting rangeRemote reset - setting: setting range | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 3-phase motor - cooling: self-cooled - setting factory settingSingle-phase motor | 120 s - reset manual - setting factory setting1...1000 s - reset manual or automatic reset - setting settable | 14.2 x Ir +/- 20 % | 15 kW | 70 % 500 ms conforming to IEC 61000-4-11 | 15 kW at 690 V AC 50/60 Hz9 kW at 500 V AC 50/60 Hz7.5 kW at < 400...415 V AC 50/60 Hz | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | 140 mA at 24 V AC I maximum while closing with LUB12220 mA at 24 V AC I maximum while closing with LUB3270 mA at 24 V AC I rms sealed with LUB1290 mA at 24 V AC I rms sealed with LUB32 | 14.5 V for AC circuit 24 V drop-out20...26.5 V for AC circuit 24 V in operation | 2 W for control circuit with LUB123 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 0.135 kg | Plug-in | 10 V conforming to IEC 61000-4-6 | Magnetic Control Unit | AC-41AC-43AC-44 | Manual resetShort-circuit protection | English - setting factory settingEnglish, French, German, Italian, Spanish - setting settable | Magnetic control unit | ASILUFC5ASILUFC51LUFC00LULC031LULC033LULC07LULC08LULC09LULC15 | Average current - setting factory settingAverage current - setting settableCause of last 5 faults - setting settableCurrent in phase - setting settableEarth leakage current - setting settablePhase imbalance - setting settableThermal state of motor - setting settable | TeSys U | LUCL | 24 V ac | 4.5 → 18 A | Protection of variable speed drive or soft startsoft stop unit | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit50 ms closing with LUB12 for control circuit50 ms closing with LUB32 for control circuit60 ms closing with LUB12 for control circuit60 ms closing with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | -40...85 °C | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | 2000 m | TH conforming to IEC 60068 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | 4.5...18 A | - | - | - |
Magnetic Control Unit,24Vac,1.4A Schneider Electric component LUCL1XB: magnetic control unit LUCL 0.35...1.4 A - 24 V - AC Schneider Electric | 143 | 1: ¥408.7956 | - | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | CE | Automatic reset - setting: setting rangeManual - setting: factory settingManual - setting: setting rangeRemote reset - setting: setting range | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 3-phase motor - cooling: self-cooled - setting factory settingSingle-phase motor | 120 s - reset manual - setting factory setting1...1000 s - reset manual or automatic reset - setting settable | 14.2 x Ir +/- 20 % | 0.25 kW | 70 % 500 ms conforming to IEC 61000-4-11 | 0.25 kW at < 400...415 V AC 50/60 Hz | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | 140 mA at 24 V AC I maximum while closing with LUB12220 mA at 24 V AC I maximum while closing with LUB3270 mA at 24 V AC I rms sealed with LUB1290 mA at 24 V AC I rms sealed with LUB32 | 14.5 V for AC circuit 24 V drop-out20...26.5 V for AC circuit 24 V in operation | 2 W for control circuit with LUB123 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 0.135 kg | Plug-in | 10 V conforming to IEC 61000-4-6 | Magnetic Control Unit | AC-41AC-43AC-44 | Manual resetShort-circuit protection | English - setting factory settingEnglish, French, German, Italian, Spanish - setting settable | Magnetic control unit | ASILUFC5ASILUFC51LUFC00LULC031LULC033LULC07LULC08LULC09LULC15 | Average current - setting factory settingAverage current - setting settableCause of last 5 faults - setting settableCurrent in phase - setting settableEarth leakage current - setting settablePhase imbalance - setting settableThermal state of motor - setting settable | TeSys U | LUCL | 24 V ac | 0.35 → 1.4 A | Protection of variable speed drive or soft startsoft stop unit | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit50 ms closing with LUB12 for control circuit50 ms closing with LUB32 for control circuit60 ms closing with LUB12 for control circuit60 ms closing with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | -40...85 °C | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | 2000 m | TH conforming to IEC 60068 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | 0.35...1.4 A | - | - | - |
Magnetic Control Unit,24Vac,12A Schneider Electric component LUCL12B: magnetic control unit LUCL 3...12 A - 24 V - AC Schneider Electric TeSys U-Line 系列 9 kW 磁控制单元 , 24 V 交流, 3 → 12 A Schneider Electric | 10 | 1: ¥582.86 | - | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | CE | Automatic reset - setting: setting rangeManual - setting: factory settingManual - setting: setting rangeRemote reset - setting: setting range | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 3-phase motor - cooling: self-cooled - setting factory settingSingle-phase motor | 120 s - reset manual - setting factory setting1...1000 s - reset manual or automatic reset - setting settable | 14.2 x Ir +/- 20 % | 9 kW | 70 % 500 ms conforming to IEC 61000-4-11 | 9 kW at 690 V AC 50/60 Hz5.5 kW at 500 V AC 50/60 Hz5.5 kW at < 400...415 V AC 50/60 Hz | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | 140 mA at 24 V AC I maximum while closing with LUB12220 mA at 24 V AC I maximum while closing with LUB3270 mA at 24 V AC I rms sealed with LUB1290 mA at 24 V AC I rms sealed with LUB32 | 14.5 V for AC circuit 24 V drop-out20...26.5 V for AC circuit 24 V in operation | 2 W for control circuit with LUB123 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 0.135 kg | Plug-in | 10 V conforming to IEC 61000-4-6 | Magnetic Control Unit | AC-41AC-43AC-44 | Manual resetShort-circuit protection | English - setting factory settingEnglish, French, German, Italian, Spanish - setting settable | Magnetic control unit | ASILUFC5ASILUFC51LUFC00LULC031LULC033LULC07LULC08LULC09LULC15 | Average current - setting factory settingAverage current - setting settableCause of last 5 faults - setting settableCurrent in phase - setting settableEarth leakage current - setting settablePhase imbalance - setting settableThermal state of motor - setting settable | TeSys U | LUCL | 24 V ac | 3 → 12 A | Protection of variable speed drive or soft startsoft stop unit | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit50 ms closing with LUB12 for control circuit50 ms closing with LUB32 for control circuit60 ms closing with LUB12 for control circuit60 ms closing with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | -40...85 °C | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | 2000 m | TH conforming to IEC 60068 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | 3...12 A | 3 → 12 A | 24 V 交流 | U-Line |
Magnetic Control Unit,110-240V,18A Schneider Electric component LUCL18FU: magnetic control unit LUCL 4.5...18 A - 110..220 V - DC/AC Schneider Electric | 124 | 1: ¥473.0828 | - | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | CE | Automatic reset - setting: setting rangeManual - setting: factory settingManual - setting: setting rangeRemote reset - setting: setting range | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 3-phase motor - cooling: self-cooled - setting factory settingSingle-phase motor | 120 s - reset manual - setting factory setting1...1000 s - reset manual or automatic reset - setting settable | 14.2 x Ir +/- 20 % | 15 kW | 70 % 500 ms conforming to IEC 61000-4-11 | 15 kW at 690 V AC 50/60 Hz9 kW at 500 V AC 50/60 Hz7.5 kW at < 400...415 V AC 50/60 Hz | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | 25 mA at 110...220 V DC I rms sealed with LUB3225 mA at 110...240 V AC I rms sealed with LUB32280 mA at 110...220 V DC I maximum while closing with LUB12280 mA at 110...220 V DC I maximum while closing with LUB32280 mA at 110...240 V AC I maximum while closing with LUB12280 mA at 110...240 V AC I maximum while closing with LUB3235 mA at 110...220 V DC I rms sealed with LUB1235 mA at 110...240 V AC I rms sealed with LUB12 | 55 V for AC circuit 110...240 V drop-out55 V for DC circuit 110...240 V drop-out88...242 V for DC circuit 110...240 V in operation88...264 V for AC circuit 110...240 V in operation | 2 W for control circuit with LUB123 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 0.135 kg | Plug-in | 10 V conforming to IEC 61000-4-6 | Magnetic Control Unit | AC-41AC-43AC-44 | Manual resetShort-circuit protection | English - setting factory settingEnglish, French, German, Italian, Spanish - setting settable | Magnetic control unit | ASILUFC5ASILUFC51LUFC00LULC031LULC033LULC07LULC08LULC09LULC15 | Average current - setting factory settingAverage current - setting settableCause of last 5 faults - setting settableCurrent in phase - setting settableEarth leakage current - setting settablePhase imbalance - setting settableThermal state of motor - setting settable | TeSys U | LUCL | 110 → 220 V dc, 110 → 240 V ac | 4.5 → 18 A | Protection of variable speed drive or soft startsoft stop unit | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit50 ms closing with LUB12 for control circuit50 ms closing with LUB32 for control circuit60 ms closing with LUB12 for control circuit60 ms closing with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | -40...85 °C | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | 2000 m | TH conforming to IEC 60068 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | 4.5...18 A | - | - | - |
Magnetic Control Unit,110-240V,12A Schneider Electric component LUCL12FU: magnetic control unit LUCL 3...12 A - 110..220 V - DC/AC Schneider Electric TeSys U-Line 系列 9 kW 磁控制单元 , 110 → 220 V 直流，110 → 240 V 交流, 3 → 12 A Schneider Electric | 10 | 1: ¥582.86 | - | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | CE | Automatic reset - setting: setting rangeManual - setting: factory settingManual - setting: setting rangeRemote reset - setting: setting range | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 3-phase motor - cooling: self-cooled - setting factory settingSingle-phase motor | 120 s - reset manual - setting factory setting1...1000 s - reset manual or automatic reset - setting settable | 14.2 x Ir +/- 20 % | 9 kW | 70 % 500 ms conforming to IEC 61000-4-11 | 9 kW at 690 V AC 50/60 Hz5.5 kW at 500 V AC 50/60 Hz5.5 kW at < 400...415 V AC 50/60 Hz | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | 25 mA at 110...220 V DC I rms sealed with LUB3225 mA at 110...240 V AC I rms sealed with LUB32280 mA at 110...220 V DC I maximum while closing with LUB12280 mA at 110...220 V DC I maximum while closing with LUB32280 mA at 110...240 V AC I maximum while closing with LUB12280 mA at 110...240 V AC I maximum while closing with LUB3235 mA at 110...220 V DC I rms sealed with LUB1235 mA at 110...240 V AC I rms sealed with LUB12 | 55 V for AC circuit 110...240 V drop-out55 V for DC circuit 110...240 V drop-out88...242 V for DC circuit 110...240 V in operation88...264 V for AC circuit 110...240 V in operation | 2 W for control circuit with LUB123 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 0.135 kg | Plug-in | 10 V conforming to IEC 61000-4-6 | Magnetic Control Unit | AC-41AC-43AC-44 | Manual resetShort-circuit protection | English - setting factory settingEnglish, French, German, Italian, Spanish - setting settable | Magnetic control unit | ASILUFC5ASILUFC51LUFC00LULC031LULC033LULC07LULC08LULC09LULC15 | Average current - setting factory settingAverage current - setting settableCause of last 5 faults - setting settableCurrent in phase - setting settableEarth leakage current - setting settablePhase imbalance - setting settableThermal state of motor - setting settable | TeSys U | LUCL | 110 → 220 V dc, 110 → 240 V ac | 3 → 12 A | Protection of variable speed drive or soft startsoft stop unit | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit50 ms closing with LUB12 for control circuit50 ms closing with LUB32 for control circuit60 ms closing with LUB12 for control circuit60 ms closing with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | -40...85 °C | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | 2000 m | TH conforming to IEC 60068 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | 3...12 A | 3 → 12 A | 110 → 220 V 直流，110 → 240 V 交流 | U-Line |
Magnetic Control Unit,48-72V,1.4A Schneider Electric component LUCL1XES: magnetic control unit LUCL 0.35...1.4 A - 48â Schneider Electric | 143 | 1: ¥408.7956 | - | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | CE | Automatic reset - setting: setting rangeManual - setting: factory settingManual - setting: setting rangeRemote reset - setting: setting range | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 3-phase motor - cooling: self-cooled - setting factory settingSingle-phase motor | 120 s - reset manual - setting factory setting1...1000 s - reset manual or automatic reset - setting settable | 14.2 x Ir +/- 20 % | 0.25 kW | 70 % 500 ms conforming to IEC 61000-4-11 | 0.25 kW at < 400...415 V AC 50/60 Hz | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | 280 mA at 48...72 V AC I maximum while closing with LUB12280 mA at 48...72 V AC I maximum while closing with LUB32280 mA at 48...72 V DC I maximum while closing with LUB12280 mA at 48...72 V DC I maximum while closing with LUB3235 mA at 48...72 V AC I rms sealed with LUB1235 mA at 48...72 V DC I rms sealed with LUB1245 mA at 48...72 V AC I rms sealed with LUB3245 mA at 48...72 V DC I rms sealed with LUB32 | 29 V for AC circuit 48...72 V drop-out29 V for DC circuit 48...72 V drop-out38.5...72 V for AC circuit 48...72 V in operation38.5...93 V for DC circuit 48...72 V in operation | 2 W for control circuit with LUB123 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 0.135 kg | Plug-in | 10 V conforming to IEC 61000-4-6 | Magnetic Control Unit | AC-41AC-43AC-44 | Manual resetShort-circuit protection | English - setting factory settingEnglish, French, German, Italian, Spanish - setting settable | Magnetic control unit | ASILUFC5ASILUFC51LUFC00LULC031LULC033LULC07LULC08LULC09LULC15 | Average current - setting factory settingAverage current - setting settableCause of last 5 faults - setting settableCurrent in phase - setting settableEarth leakage current - setting settablePhase imbalance - setting settableThermal state of motor - setting settable | TeSys U | LUCL | 48 V ac, 48 → 72 V dc | 0.35 → 1.4 A | Protection of variable speed drive or soft startsoft stop unit | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit50 ms closing with LUB12 for control circuit50 ms closing with LUB32 for control circuit60 ms closing with LUB12 for control circuit60 ms closing with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | -40...85 °C | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | 2000 m | TH conforming to IEC 60068 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | 0.35...1.4 A | - | - | - |
Magnetic Control Unit,48-72,18A Schneider Electric component LUCL18ES: magnetic control unit LUCL 4.5...18 A - 48â Schneider Electric | 116 | 1: ¥504.6348 | - | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | CE | Automatic reset - setting: setting rangeManual - setting: factory settingManual - setting: setting rangeRemote reset - setting: setting range | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 3-phase motor - cooling: self-cooled - setting factory settingSingle-phase motor | 120 s - reset manual - setting factory setting1...1000 s - reset manual or automatic reset - setting settable | 14.2 x Ir +/- 20 % | 15 kW | 70 % 500 ms conforming to IEC 61000-4-11 | 15 kW at 690 V AC 50/60 Hz9 kW at 500 V AC 50/60 Hz7.5 kW at < 400...415 V AC 50/60 Hz | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | 280 mA at 48...72 V AC I maximum while closing with LUB12280 mA at 48...72 V AC I maximum while closing with LUB32280 mA at 48...72 V DC I maximum while closing with LUB12280 mA at 48...72 V DC I maximum while closing with LUB3235 mA at 48...72 V AC I rms sealed with LUB1235 mA at 48...72 V DC I rms sealed with LUB1245 mA at 48...72 V AC I rms sealed with LUB3245 mA at 48...72 V DC I rms sealed with LUB32 | 29 V for AC circuit 48...72 V drop-out29 V for DC circuit 48...72 V drop-out38.5...72 V for AC circuit 48...72 V in operation38.5...93 V for DC circuit 48...72 V in operation | 2 W for control circuit with LUB123 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 0.135 kg | Plug-in | 10 V conforming to IEC 61000-4-6 | Magnetic Control Unit | AC-41AC-43AC-44 | Manual resetShort-circuit protection | English - setting factory settingEnglish, French, German, Italian, Spanish - setting settable | Magnetic control unit | ASILUFC5ASILUFC51LUFC00LULC031LULC033LULC07LULC08LULC09LULC15 | Average current - setting factory settingAverage current - setting settableCause of last 5 faults - setting settableCurrent in phase - setting settableEarth leakage current - setting settablePhase imbalance - setting settableThermal state of motor - setting settable | TeSys U | LUCL | 48 V ac, 48 → 72 V dc | 4.5 → 18 A | Protection of variable speed drive or soft startsoft stop unit | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit50 ms closing with LUB12 for control circuit50 ms closing with LUB32 for control circuit60 ms closing with LUB12 for control circuit60 ms closing with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | -40...85 °C | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | 2000 m | TH conforming to IEC 60068 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | 4.5...18 A | - | - | - |
第 1 / 1 页
1