Weidmüller Holding AG & Co. KG- 接口IC
03
接口IC - 型号列表
共 17 个型号| 制造商零件编号 | 库存 | 价格 | 其他名称 | 标准包装数量 | RoHS | 类型 | IEC 61000-4-2 | 保护特性 | 符合性声明 | 频率 | 深度 | 宽度 | 高度 | 重量 | 深度（英寸） | 宽度（英寸） | 高度（英寸） | 壳体材料 | 包装数量 | 系列 | GTIN（EAN） | 固件版本 | 湿度范围 | 存储接口 | 防护等级 | 工作温度 | 安全特性 | 供电电压 | 平均整流电流 Io | 安装类型 | 操作力 | 端口数 | 其他规格 | 振动 | 动作时间 | ETIM 6*0 | 延迟时间 | 额定电压 | 连接类型 | ET（伏秒积） | LED | 灵敏度 | 反极性保护 | 触点形式 | 工作模式 | 数据速率 | 程序存储器大小 | 工具类型 | 手动超控 | IEC标准 | 波长 | 光纤端口数 | 过载保护 | 长度 | 长度（英寸） | 开关类型 | 运输信息 | 适用产品/相关产品 | 闭合系统 | 距离 | 防护类型 | 以太网 | 接口 | 线性度 | PoE端口数 | 波特率 | 带LED驱动器 | 串行协议 | RS-232（422、485） | 功能 | 协议 | 失效率 | 配置 | 总RAM位数 | 带自动流量控制 | 控制侧连接 | 数字I/O线数 | 峰值脉冲功率 | 导线类型 | 天线连接器 | 过程侧连接 | 文件类型 | 卡标准 | 颜色 | 射频系列/标准 | 总线连接 | 信号线数 | 感应距离 | 操作系统 | 电缆长度 | 紧固类型 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Connector Accessories Transparent Protective Cover STRIP PROTECTIVE TRANSP 20/PK weidmuller | 1740 | 160: ¥2.977 | STR 7 | Bag | Lead free / RoHS Compliant | Protective Cover | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Z Series | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Clear | 0515300000 | - | - | - | - | - | - |
| 10 | 1: ¥73.712 | SST5FSCHT5 | Bag | Lead free / RoHS Compliant | Marker | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | SchT Series | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Clear | 0294000000 | - | - | - | - | - | - |
 | 10 | 1: ¥904.808 | EBR-MODULE RS232 | 1 | Lead free / RoHS Compliant | EBR-MODULE RS232 | FCC Part 15, CISPR (EN55022) Class A, EN 61000-4-2 (ESD), Stage 2, EN 61000-4-3 (RS), Stage 3, EN 61000-4-4 (EFT), Stage 3, EN 61000-4-5 (surge voltage), Stage 3, EN 61000-4-6 (CS), Stage 3 | IP40 | DE_PN4800_160419_004.pdf | 19-17-01-06 | 97 mm | 32.5 mm | 12 mm | 50 g | 3.819 inch | 1.28 inch | 0.472 inch | PVC casting | Hardware Installation Guide | * | 4050118029086 | Configuration module, IP40, 0 °C...60 °C | 5 to 95 % (non-condensing) | -20 °C | 19-17-01-06 | 60 °C | - | - | - | - | - | - | - | - | - | EC000734 | 5 years | 3 to 5 V DC (via the RTS signal of the RS-232 port) | RJ45-Port, RS232 | EC000734 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.35 m | M4 screw (<4 mm) |
 | 10 | 1: ¥2,260.932 | IE-MC-VL-1TX-1SC | 1 | Lead free / RoHS Compliant | IE-MC-VL-1TX-1SC | FCC Part 15, CISPR (EN55022) Class A, EN 61000-4-2 (ESD), Stage 3, EN 61000-4-3 (RS), Stage 3, EN 61000-4-4 (EFT), Stage 3, EN 61000-4-5 (surge voltage), Stage 2, EN 61000-4-6 (CS), Stage 3, EN 61000-4-8, EN 61000-4-11 | IP30 | DE_PN4800_160418_007.pdf | 19-17-01-06 | 105 mm | 53.6 mm | 135 mm | 765 g | 4.134 inch | 2.11 inch | 5.315 inch | metal | Hardware Installation Guide | * | 4050118029147 | Media converter, Fast Ethernet, Number of ports: 1x RJ45, 1 * SC Multi-mode, IP30, 0 °C...60 °C | 5 to 95 % (non-condensing) | -40 °C | 19-17-01-06 | 60 °C | UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 | IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) und 100BaseFX | 0.16 A at 24 V | Mounting rail | according to IEC 60068-2-27 | 1x RJ45, 1 * SC Multi-mode | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA nC IIC T4 Gc | according to IEC 60068-2-6 | MIL-HDBK-217F, GB 25°C | EC000516 | 5 years | 24 V DC (12 to 48 V DC), 2 redundant inputs | Removable terminal block | EC000516 | PWR1, PWR2, FAULT, 10/100M (TP-Port), 100M (fibre-optic port)., FDX/COL (Fibre port) | -32 dBm | Available | 1 relay output with a current capacity of 1 A at 24 V DC | -20 dBm | - | - | - | - | 19-17-01-14 | 1,300 nm | 100BaseFX ports (SC connector), Multimode | 1.1 A | 105 mm | 4.134 inch | 100BaseFX full-/half-duplex mode, Port surveillance | DNV, GL | 以太网网络 | -6 dBm | 5 km (50/125 μm, 800 MHz*km fibre optic cable), 4 km (62.5/125 μm, 500 MHz*km fibre optic cable) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 以太网 | - | - | - | - | - |
 | 5000 | 1: ¥2,509.676 | IE-MC-VL-1TX-1ST | 1 | Lead free / RoHS Compliant | IE-MC-VL-1TX-1ST | FCC Part 15, CISPR (EN55022) Class A, EN 61000-4-2 (ESD), Stage 3, EN 61000-4-3 (RS), Stage 3, EN 61000-4-4 (EFT), Stage 3, EN 61000-4-5 (surge voltage), Stage 2, EN 61000-4-6 (CS), Stage 3, EN 61000-4-8, EN 61000-4-11 | IP30 | DE_PN4800_160418_007.pdf | 19-17-01-06 | 105 mm | 53.6 mm | 135 mm | 765 g | 4.134 inch | 2.11 inch | 5.315 inch | metal | Hardware Installation Guide | * | 4050118029321 | Media converter, Fast Ethernet, Number of ports: 1x RJ45, 1 * ST Multi-mode, IP30, 0 °C...60 °C | 5 to 95 % (non-condensing) | -40 °C | 19-17-01-06 | 60 °C | UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 | IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) und 100BaseFX | 0.16 A at 24 V | Mounting rail | according to IEC 60068-2-27 | 1x RJ45, 1 * ST Multi-mode | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA nC IIC T4 Gc | according to IEC 60068-2-6 | MIL-HDBK-217F, GB 25°C | EC000516 | 5 years | 24 V DC (12 to 48 V DC), 2 redundant inputs | Removable terminal block | EC000516 | PWR1, PWR2, FAULT, 10/100M (TP-Port), 100M (fibre-optic port)., FDX/COL (Fibre port) | -32 dBm | Available | 1 relay output with a current capacity of 1 A at 24 V DC | -20 dBm | - | - | - | - | 19-17-01-14 | 1,300 nm | 100BaseFX ports (ST connector), Multimode | 1.1 A | 105 mm | 4.134 inch | 100BaseFX full-/half-duplex mode, Port surveillance | DNV, GL | - | -6 dBm | 5 km (50/125 μm, 800 MHz*km fibre optic cable), 4 km (62.5/125 μm, 500 MHz*km fibre optic cable) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 | 117 | 1: ¥2,272.628 | IE-CS-1TX-1RS232/485 | 1 | Lead free / RoHS Compliant | IE-CS-2TX-1RS232/485 | FCC Part 15 Subpart B Class A, EN 55022 Class A, EN 61000-4-2 (ESD), Stage 3, EN 61000-4-3 (RS), Stage 3, EN 61000-4-4 (EFT), level 4, EN 61000-4-5 (Surge), Stage 3, EN 61000-4-6 (CS), Stage 3, EN 61000-4-8, EN 61000-4-11 | IP30 | DE_PN4800_160418_008.pdf | 19-17-01-06 | 105 mm | 36 mm | 140 mm | 475 g | 4.134 inch | 1.417 inch | 5.512 inch | metal | Hardware Installation Guide | * | 4050118030266 | Serial / Ethernet converter, 2x RJ45, 1x DB9 for RS-232, 1x terminal block for RS-422/485, IP30, 0 °C...60 °C | 5 to 95 % (non-condensing) | 85 °C | 19-17-01-06 | 60 °C | UL508 | 12 to 48 V DC | 0.220 A at 12 V DC, 0.110 A at 24 V DC | Mounting rail | according to IEC 60068-2-27 | 10/100BaseT(X), Auto MDI/MDI-X port | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA nC IIC T3 Gc | according to IEC 60068-2-6 | Telcordia (Bellcore), GB | EC001262 | - | - | - | EC001262 | - | - | - | - | - | 5, 6, 7, 8 | Version 1.0.6 | S/E-Converter Administration Tool | Manual | - | - | - | - | - | - | - | - | - | - | - | 15 kV ESD protection for all signals, 1 kV (Level 2) surge protection | 2 | RS-232/422/485 | neither, even, odd, Space, Mark | 1 | 50 bit/s to 921.6 kbit/s | SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i | DB9 RS-232, Terminal block for RS-422/485 | TxD+, TxD-, RxD+, RxD-, GND | Built-in buzzer and RTC | ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP, IGMP | Built-in Watchdog Timer (WDT) | Web console, serial console, Telnet console, Windows utility | 1, 1.5, 2 | RTS/CTS and DTR/DSR (RS-232), XON/XOFF | ADDC® (automatic data direction control) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 | 10 | 1: ¥2,767.736 | IE-CS-1TX-2RS232/485 | 1 | Lead free / RoHS Compliant | IE-CS-2TX-2RS232/485 | EN 61000-4-2 (ESD), Stage 3, EN 61000-4-3 (RS), Stage 3, EN 61000-4-5 (surge), EN 61000-4-5 (surge voltage), Stage 3, EN 61000-4-6 (CS), Stage 3, EN 61000-4-8, EN 61000-4-11, EN 55022 Class A, EN 55024, FCC Part 15, Section B, Class A | IP30 | DE_PN4800_160418_008.pdf | 19-17-01-06 | 105 mm | 36 mm | 140 mm | 485 g | 4.134 inch | 1.417 inch | 5.512 inch | metal | Hardware Installation Guide | * | 4050118030495 | Serial / Ethernet converter, 2x RJ45, 2x DB9 for RS-232/422/485, IP30, 0 °C...60 °C | 5 to 95 % (non-condensing) | 85 °C | 19-17-01-06 | 60 °C | UL508 | 12 to 48 V DC | 0.250 A at 12 V DC, 0.125 A at 24 V DC | Mounting rail | according to IEC 60068-2-27 | 10/100BaseT(X), Auto MDI/MDI-X port | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA nC IIC T3 Gc | according to IEC 60068-2-6 | Telcordia (Bellcore), GB | EC001262 | - | - | - | EC001262 | - | - | - | - | - | 5, 6, 7, 8 | Version 1.0.6 | S/E-Converter Administration Tool | Manual | - | - | - | - | - | - | - | - | - | - | - | 15 kV ESD protection for all signals, 1 kV (Level 2) surge protection | 2 | RS-232/422/485 | neither, even, odd, Space, Mark | 2 | 50 bit/s to 921.6 kbit/s | SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i | DB9 for RS-232/422/485 | TxD+, TxD-, RxD+, RxD-, GND | Built-in buzzer and RTC | ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP, IGMP | Built-in Watchdog Timer (WDT) | Web console, serial console, Telnet console, Windows utility | 1, 1.5, 2 | RTS/CTS and DTR/DSR (RS-232), XON/XOFF | ADDC® (automatic data direction control) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| 10 | 1: ¥2,796.16 | IE-MC-VLT-1TX-1SC | 1 | Lead free / RoHS Compliant | IE-MC-VLT-1TX-1SC | FCC Part 15, CISPR (EN55022) Class A, EN 61000-4-2 (ESD), Stage 3, EN 61000-4-3 (RS), Stage 3, EN 61000-4-4 (EFT), Stage 3, EN 61000-4-5 (surge voltage), Stage 2, EN 61000-4-6 (CS), Stage 3, EN 61000-4-8, EN 61000-4-11 | IP30 | DE_PN4800_160418_007.pdf | 19-17-01-14 | 105 mm | 53.6 mm | 135 mm | 765 g | 4.134 inch | 2.11 inch | 5.315 inch | metal | Hardware Installation Guide | * | 4050118077599 | Media converter, Fast Ethernet, Number of ports: 1x RJ45, 1 * SC Multi-mode, IP30, -40 °C...75 °C | 5 to 95 % (non-condensing) | -40 °C | 19-17-01-14 | 75 °C | UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 | IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) und 100BaseFX | 0.16 A at 24 V | Mounting rail | according to IEC 60068-2-27 | 1x RJ45, 1 * SC Multi-mode | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA nC IIC T4 Gc | according to IEC 60068-2-6 | MIL-HDBK-217F, GB 25°C | EC001467 | 5 years | 24 V DC (12 to 48 V DC), 2 redundant inputs | Removable terminal block | - | PWR1, PWR2, FAULT, 10/100M (TP-Port), 100M (fibre-optic port)., FDX/COL (Fibre port) | -32 dBm | Available | 1 relay output with a current capacity of 1 A at 24 V DC | -20 dBm | - | - | - | - | 19-17-01-14 | 1,300 nm | 100BaseFX ports (SC connector), Multimode | 1.1 A | 105 mm | 4.134 inch | 100BaseFX full-/half-duplex mode, Port surveillance | DNV, GL | - | -6 dBm | 5 km (50/125 μm, 800 MHz*km fibre optic cable), 4 km (62.5/125 μm, 500 MHz*km fibre optic cable) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| 10 | 1: ¥2,796.16 | IE-MC-VLT-1TX-1ST | 1 | Lead free / RoHS Compliant | IE-MC-VLT-1TX-1ST | FCC Part 15, CISPR (EN55022) Class A, EN 61000-4-2 (ESD), Stage 3, EN 61000-4-3 (RS), Stage 3, EN 61000-4-4 (EFT), Stage 3, EN 61000-4-5 (surge voltage), Stage 2, EN 61000-4-6 (CS), Stage 3, EN 61000-4-8, EN 61000-4-11 | IP30 | DE_PN4800_160418_007.pdf | 19-17-01-14 | 105 mm | 53.6 mm | 135 mm | 630 g | 4.134 inch | 2.11 inch | 5.315 inch | metal | Hardware Installation Guide | * | 4050118077827 | Media converter, Fast Ethernet, Number of ports: 1x RJ45, 1 * ST Multi-mode, IP30, -40 °C...75 °C | 5 to 95 % (non-condensing) | -40 °C | 19-17-01-14 | 75 °C | UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 | IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) und 100BaseFX | 0.16 A at 24 V | Mounting rail | according to IEC 60068-2-27 | 1x RJ45, 1 * ST Multi-mode | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA nC IIC T4 Gc | according to IEC 60068-2-6 | MIL-HDBK-217F, GB 25°C | EC001467 | 5 years | 24 V DC (12 to 48 V DC), 2 redundant inputs | Removable terminal block | - | PWR1, PWR2, FAULT, 10/100M (TP-Port), 100M (fibre-optic port)., FDX/COL (Fibre port) | -32 dBm | Available | 1 relay output with a current capacity of 1 A at 24 V DC | -20 dBm | - | - | - | - | 19-17-01-14 | 1,300 nm | 100BaseFX ports (ST connector), Multimode | 1.1 A | 105 mm | 4.134 inch | 100BaseFX full-/half-duplex mode, Port surveillance | DNV, GL | - | -6 dBm | 5 km (50/125 μm, 800 MHz*km fibre optic cable), 4 km (62.5/125 μm, 500 MHz*km fibre optic cable) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| 10 | 1: ¥3,308.54 | IE-CST-2TX-1RS232/485 | 1 | Lead free / RoHS Compliant | IE-CST-2TX-1RS232/485 | EN 61000-4-2 (ESD), Stage 3, EN 61000-4-3 (RS), Stage 3, EN 61000-4-5 (surge), EN 61000-4-5 (surge voltage), Stage 3, EN 61000-4-6 (CS), Stage 3, EN 61000-4-8, EN 61000-4-11, EN 55022 Class A, EN 55024, FCC Part 15, Section B, Class A | IP30 | DE_PN4800_160418_008.pdf | 19-17-01-90 | 105 mm | 36 mm | 140 mm | 475 g | 4.134 inch | 1.417 inch | 5.512 inch | metal | Hardware Installation Guide | * | 4050118076639 | Serial / Ethernet converter, 2x RJ45, 1x DB9 for RS-232, 1x terminal block for RS-422/485, IP30, -40 °C...75 °C | 5 to 95 % (non-condensing) | -40 °C | 19-17-01-90 | 75 °C | UL508 | 12 to 48 V DC | 0.220 A at 12 V DC, 0.110 A at 24 V DC | Mounting rail | according to IEC 60068-2-27 | 10/100BaseT(X), Auto MDI/MDI-X port | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA nC IIC T3 Gc | according to IEC 60068-2-6 | Telcordia (Bellcore), GB | - | - | - | - | - | - | - | - | - | - | 5, 6, 7, 8 | Version 1.0.6 | S/E-Converter Administration Tool | Manual | - | - | - | - | - | - | - | - | - | - | - | 15 kV ESD protection for all signals, 1 kV (Level 2) surge protection | 2 | RS-232/422/485 | neither, even, odd, Space, Mark | 1 | 50 bit/s to 921.6 kbit/s | SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i | DB9 RS-232, Terminal block for RS-422/485 | TxD+, TxD-, RxD+, RxD-, GND | Built-in buzzer and RTC | ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP, IGMP | Built-in Watchdog Timer (WDT) | Web console, serial console, Telnet console, Windows utility | 1, 1.5, 2 | RTS/CTS and DTR/DSR (RS-232), XON/XOFF | ADDC® (automatic data direction control) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 | 48 | 1: ¥3,623.924 | IE-MC-VL-1TX-1SCS | 1 | Lead free / RoHS Compliant | IE-MC-VL-1TX-1SCS | FCC Part 15, CISPR (EN55022) Class A, EN 61000-4-2 (ESD), Stage 3, EN 61000-4-3 (RS), Stage 3, EN 61000-4-4 (EFT), Stage 3, EN 61000-4-5 (surge voltage), Stage 2, EN 61000-4-6 (CS), Stage 3, EN 61000-4-8, EN 61000-4-11 | IP30 | DE_PN4800_160418_007.pdf | 19-17-01-06 | 105 mm | 53.6 mm | 135 mm | 765 g | 4.134 inch | 2.11 inch | 5.315 inch | metal | Hardware Installation Guide | * | 4050118029185 | Media converter, Fast Ethernet, Number of ports: 1x RJ45, 1 * SC Single-mode, IP30, 0 °C...60 °C | 5 to 95 % (non-condensing) | -40 °C | 19-17-01-06 | 60 °C | UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 | IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) und 100BaseFX | 0.16 A at 24 V | Mounting rail | according to IEC 60068-2-27 | 1x RJ45, 1 * SC Single-mode | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA nC IIC T4 Gc | according to IEC 60068-2-6 | MIL-HDBK-217F, GB 25°C | EC000516 | 5 years | 24 V DC (12 to 48 V DC), 2 redundant inputs | Removable terminal block | EC000516 | PWR1, PWR2, FAULT, 10/100M (TP-Port), 100M (fibre-optic port)., FDX/COL (Fibre port) | -34 dBm | Available | 1 relay output with a current capacity of 1 A at 24 V DC | -5 dBm | - | - | - | - | 19-17-01-14 | 1,310 nm | 100BaseFX ports (SC connector), Singlemode | 1.1 A | 105 mm | 4.134 inch | 100BaseFX full-/half-duplex mode, Port surveillance | DNV, GL | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 29 dB | 40 km (9/125 μm, 3,5 PS/(nm*km) fibre optic cable) | -3 dBm | - | - |
| 10 | 1: ¥3,663.092 | IE-CST-2TX-2RS232/485 | 1 | Lead free / RoHS Compliant | IE-CST-2TX-2RS232/485 | EN 61000-4-2 (ESD), Stage 3, EN 61000-4-3 (RS), Stage 3, EN 61000-4-5 (surge), EN 61000-4-5 (surge voltage), Stage 3, EN 61000-4-6 (CS), Stage 3, EN 61000-4-8, EN 61000-4-11, EN 55022 Class A, EN 55024, FCC Part 15, Section B, Class A | IP30 | DE_PN4800_160418_008.pdf | 19-17-01-90 | 105 mm | 36 mm | 140 mm | 485 g | 4.134 inch | 1.417 inch | 5.512 inch | metal | Hardware Installation Guide | * | 4050118076431 | Serial / Ethernet converter, 2x RJ45, 2x DB9 for RS-232/422/485, IP30, -40 °C...75 °C | 5 to 95 % (non-condensing) | -40 °C | 19-17-01-90 | 75 °C | UL508 | 12 to 48 V DC | 0.250 A at 12 V DC, 0.125 A at 24 V DC | Mounting rail | according to IEC 60068-2-27 | 10/100BaseT(X), Auto MDI/MDI-X port | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA nC IIC T3 Gc | according to IEC 60068-2-6 | Telcordia (Bellcore), GB | - | - | - | - | - | - | - | - | - | - | 5, 6, 7, 8 | Version 1.0.6 | S/E-Converter Administration Tool | Manual | - | - | - | - | - | - | - | - | - | - | - | 15 kV ESD protection for all signals, 1 kV (Level 2) surge protection | 2 | RS-232/422/485 | neither, even, odd, Space, Mark | 2 | 50 bit/s to 921.6 kbit/s | SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i | DB9 for RS-232/422/485 | TxD+, TxD-, RxD+, RxD-, GND | Built-in buzzer and RTC | ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP, IGMP | Built-in Watchdog Timer (WDT) | Web console, serial console, Telnet console, Windows utility | 1, 1.5, 2 | RTS/CTS and DTR/DSR (RS-232), XON/XOFF | ADDC® (automatic data direction control) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| 10 | 1: ¥4,200.904 | IE-MC-VLT-1TX-1SCS | 1 | Lead free / RoHS Compliant | IE-MC-VLT-1TX-1SCS | FCC Part 15, CISPR (EN55022) Class A, EN 61000-4-2 (ESD), Stage 3, EN 61000-4-3 (RS), Stage 3, EN 61000-4-4 (EFT), Stage 3, EN 61000-4-5 (surge voltage), Stage 2, EN 61000-4-6 (CS), Stage 3, EN 61000-4-8, EN 61000-4-11 | IP30 | DE_PN4800_160418_007.pdf | 19-17-01-14 | 105 mm | 53.6 mm | 135 mm | 765 g | 4.134 inch | 2.11 inch | 5.315 inch | metal | Hardware Installation Guide | * | 4050118077766 | Media converter, Fast Ethernet, Number of ports: 1x RJ45, 1 * SC Single-mode, IP30, -40 °C...75 °C | 5 to 95 % (non-condensing) | -40 °C | 19-17-01-14 | 75 °C | UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 | IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) und 100BaseFX | 0.16 A at 24 V | Mounting rail | according to IEC 60068-2-27 | 1x RJ45, 1 * SC Single-mode | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA nC IIC T4 Gc | according to IEC 60068-2-6 | MIL-HDBK-217F, GB 25°C | EC001467 | 5 years | 24 V DC (12 to 48 V DC), 2 redundant inputs | Removable terminal block | - | PWR1, PWR2, FAULT, 10/100M (TP-Port), 100M (fibre-optic port)., FDX/COL (Fibre port) | -34 dBm | Available | 1 relay output with a current capacity of 1 A at 24 V DC | -5 dBm | - | - | - | - | 19-17-01-14 | 1,310 nm | 100BaseFX ports (SC connector), Singlemode | 1.1 A | 105 mm | 4.134 inch | 100BaseFX full-/half-duplex mode, Port surveillance | DNV, GL | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 29 dB | 40 km (9/125 μm, 3,5 PS/(nm*km) fibre optic cable) | -3 dBm | - | - |
 | 10 | 1: ¥5,645.428 | IE-WL-AP-BR-CL-ABG-US | 1 | Lead free / RoHS Compliant | IE-WL-AP-BR-CL-ABG-US | EN 301 489-1/-17, FCC Part 15, Section B Class B, EN 55022/55024 | IP30 | DE_PN4800_160418_009.pdf | 19-17-01-06 | 105 mm | 53.6 mm | 135 mm | 850 g | 4.134 inch | 2.11 inch | 5.315 inch | metal | Hardware Installation Guide | * | 4050118030501 | Wireless Access Point/Bridge/Client, IEEE 802.11 a/b/g, US Model, IP30, 0 °C...60 °C | 5 to 95 % (non-condensing) | -40 °C | 19-17-01-06 | 60 °C | EN60950-1, UL60950-1 | IEEE 802.11a/b/g/h for Wireless LAN, IEEE 802.11i for Wireless Security, IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3af for Power-over-Ethernet, IEEE 802.1D for the Spanning Tree protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN tagging | 0.121 to 0.494 A at 12 to 48V DC, 0.3 A at 24V DC | Mounting rail | according to IEC 60068-2-27 | 10/100BaseT(X), auto negotiation | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA IIC T4 Gc | according to IEC 60068-2-6 | 392,209 hrs | EC000018 | 5 years | 12 to 48 V DC, redundant dual DC inputs or 48 V DC Power over Ethernet (IEEE 802.3af) | 1 removable 10-pole terminal block | EC000018 | PWR1, PWR2, PoE, FAULT, STATE, SIGNAL, CLIENT, BRIDGE, WLAN, 10M, 100M | 802.11b: -97 dBm at 1 MBit/s, -94 dBm at 2 MBit/s, -92 dBm at 5.5 MBit/s, -90 dBm at 11 MBit/s, 802.11g: -93 dBm at 6 MBit/s, -91 dBm at 9 Mbps, -90 dBm at 12 MBit/s, -88 dBm at 18 MBit/s, -84 dBm at 24 MBit/s, -80 dBm at 36 MBit/s, -76 dBm at 48 MBit/s, -74 dBm at 54 MBit/s, 802.11a: -90 dBm at 6 MBit/s, -89 dBm at 9 MBit/s, -89 dBm at 12 MBit/s, -85 dBm at 18 MBit/s, -83 dBm at 24 MBit/s, -79 dBm at 36 MBit/s, -75 dBm at 48 MBit/s, -74 dBm at 54 MBit/s | Available | 1 relay output with a current capacity of 1 A at 24 V DC | EU: 2.412 to 2.462 GHz (11 channels), 5.18 to 5.24 GHz (4 channels) | 802.11b: 1, 2, 5,5, 11 MBit/s, 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 MBit/s | Version 1.11.4 | WLAN Administration Tool | Manual | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 inputs with the same ground, isolated+13 To +30 V for logic "1"-30 To +3 V for logic "0"Max. input current: 8 mA | 802.11b: typically 23±1.5 dBm at 1 to 11 MBit/s, 802.11g: typically 20±1.5 dBm at 6 to 24 MBit/s, 19±1.5 dBm at 36 MBit/s, 18±1.5 dBm at 48 MBit/s, 17±1.5 dBm at 54 MBit/s, 802.11a: typically 18±1.5 dBm at 6 to 24 MBit/s, 16±1.5 dBm at 36 to 48 MBit/s, 15±1.5 dBm at 54 MBit/s | EN 300 328, EN 301893 | RP-SMA (coupler) | DSSS with DBPSK, DQPSK, CCK, OFDM with BPSK, QPSK, 16QAM, 64QAM, 802.11b: CCK at 11/5.5 MBit/s, DQPSK at 2 MBit/s, DBPSK at 11 MBit/s, 802.11a / g: 64QAM at 54/48 MBit/s, 16QAM at 36/24 MBit/s, QPSK at 18/12 MBit/s, BPSK at 9/6 MBit/s | SNMP MIB file | 2 dBi omni-directional dual band antenna, RP-SMA (male plug) | - | - | - | - | - | - | - | - |
| 10 | 1: ¥5,824.064 | IE-WL-AP-BR-CL-ABG-EU | 1 | Lead free / RoHS Compliant | IE-WL-AP-BR-CL-ABG-EU | EN 301 489-1/-17, FCC Part 15, Section B Class B, EN 55022/55024 | IP30 | DE_PN4800_160418_009.pdf | 19-17-01-06 | 105 mm | 53.6 mm | 135 mm | 850 g | 4.134 inch | 2.11 inch | 5.315 inch | metal | Hardware Installation Guide | * | 4050118030488 | Wireless Access Point/Bridge/Client, IEEE 802.11 a/b/g, EU Model, IP30, 0 °C...60 °C | 5 to 95 % (non-condensing) | -40 °C | 19-17-01-06 | 60 °C | EN60950-1, UL60950-1 | IEEE 802.11a/b/g/h for Wireless LAN, IEEE 802.11i for Wireless Security, IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3af for Power-over-Ethernet, IEEE 802.1D for the Spanning Tree protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN tagging | 0.121 to 0.494 A at 12 to 48V DC, 0.3 A at 24V DC | Mounting rail | according to IEC 60068-2-27 | 10/100BaseT(X), auto negotiation | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA IIC T4 Gc | according to IEC 60068-2-6 | 392,209 hrs | EC000018 | 5 years | 12 to 48 V DC, redundant dual DC inputs or 48 V DC Power over Ethernet (IEEE 802.3af) | 1 removable 10-pole terminal block | EC000018 | PWR1, PWR2, PoE, FAULT, STATE, SIGNAL, CLIENT, BRIDGE, WLAN, 10M, 100M | 802.11b: -97 dBm at 1 MBit/s, -94 dBm at 2 MBit/s, -92 dBm at 5.5 MBit/s, -90 dBm at 11 MBit/s, 802.11g: -93 dBm at 6 MBit/s, -91 dBm at 9 Mbps, -90 dBm at 12 MBit/s, -88 dBm at 18 MBit/s, -84 dBm at 24 MBit/s, -80 dBm at 36 MBit/s, -76 dBm at 48 MBit/s, -74 dBm at 54 MBit/s, 802.11a: -90 dBm at 6 MBit/s, -89 dBm at 9 MBit/s, -89 dBm at 12 MBit/s, -85 dBm at 18 MBit/s, -83 dBm at 24 MBit/s, -79 dBm at 36 MBit/s, -75 dBm at 48 MBit/s, -74 dBm at 54 MBit/s | Available | 1 relay output with a current capacity of 1 A at 24 V DC | EU: 2.412 to 2.472 GHz (13 channels), 5.18 to 5.24 GHz (4 channels) | 802.11b: 1, 2, 5,5, 11 MBit/s, 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 MBit/s | Version 1.11.4 | WLAN Administration Tool | Manual | - | - | - | - | - | - | - | - | 以太网网络 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 inputs with the same ground, isolated+13 To +30 V for logic "1"-30 To +3 V for logic "0"Max. input current: 8 mA | 802.11b: typically 23±1.5 dBm at 1 to 11 MBit/s, 802.11g: typically 20±1.5 dBm at 6 to 24 MBit/s, 19±1.5 dBm at 36 MBit/s, 18±1.5 dBm at 48 MBit/s, 17±1.5 dBm at 54 MBit/s, 802.11a: typically 18±1.5 dBm at 6 to 24 MBit/s, 16±1.5 dBm at 36 to 48 MBit/s, 15±1.5 dBm at 54 MBit/s | EN 300 328, EN 301893 | RP-SMA (coupler) | DSSS with DBPSK, DQPSK, CCK, OFDM with BPSK, QPSK, 16QAM, 64QAM, 802.11b: CCK at 11/5.5 MBit/s, DQPSK at 2 MBit/s, DBPSK at 11 MBit/s, 802.11a / g: 64QAM at 54/48 MBit/s, 16QAM at 36/24 MBit/s, QPSK at 18/12 MBit/s, BPSK at 9/6 MBit/s | SNMP MIB file | 2 dBi omni-directional dual band antenna, RP-SMA (male plug) | - | - | 以太网 | - | - | - | - | - |
| - | IE-WLT-AP-BR-CL-ABG-EU | 1 | Lead free / RoHS Compliant | IE-WLT-AP-BR-CL-ABG-EU | EN 301 489-1/-17, FCC Part 15, Section B Class B, EN 55022/55024 | IP30 | DE_PN4800_160418_009.pdf | 19-17-02-01 | 105 mm | 53.6 mm | 135 mm | 850 g | 4.134 inch | 2.11 inch | 5.315 inch | metal | Hardware Installation Guide | * | 4050118077148 | Wireless Access Point/Bridge/Client, IEEE 802.11 a/b/g, EU Model, IP30, -40 °C...75 °C | 5 to 95 % (non-condensing) | -40 °C | 19-17-02-01 | 75 °C | EN60950-1, UL60950-1 | IEEE 802.11a/b/g/h for Wireless LAN, IEEE 802.11i for Wireless Security, IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3af for Power-over-Ethernet, IEEE 802.1D for the Spanning Tree protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN tagging | 0.121 to 0.494 A at 12 to 48V DC, 0.3 A at 24V DC | Mounting rail | according to IEC 60068-2-27 | 10/100BaseT(X), auto negotiation | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA IIC T4 Gc | according to IEC 60068-2-6 | 392,209 hrs | EC000816 | 5 years | 12 to 48 V DC, redundant dual DC inputs or 48 V DC Power over Ethernet (IEEE 802.3af) | 1 removable 10-pole terminal block | EC000816 | PWR1, PWR2, PoE, FAULT, STATE, SIGNAL, CLIENT, BRIDGE, WLAN, 10M, 100M | 802.11b: -97 dBm at 1 MBit/s, -94 dBm at 2 MBit/s, -92 dBm at 5.5 MBit/s, -90 dBm at 11 MBit/s, 802.11g: -93 dBm at 6 MBit/s, -91 dBm at 9 Mbps, -90 dBm at 12 MBit/s, -88 dBm at 18 MBit/s, -84 dBm at 24 MBit/s, -80 dBm at 36 MBit/s, -76 dBm at 48 MBit/s, -74 dBm at 54 MBit/s, 802.11a: -90 dBm at 6 MBit/s, -89 dBm at 9 MBit/s, -89 dBm at 12 MBit/s, -85 dBm at 18 MBit/s, -83 dBm at 24 MBit/s, -79 dBm at 36 MBit/s, -75 dBm at 48 MBit/s, -74 dBm at 54 MBit/s | Available | 1 relay output with a current capacity of 1 A at 24 V DC | EU: 2.412 to 2.472 GHz (13 channels), 5.18 to 5.24 GHz (4 channels) | 802.11b: 1, 2, 5,5, 11 MBit/s, 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 MBit/s | Version 1.11.4 | WLAN Administration Tool | Manual | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 inputs with the same ground, isolated+13 To +30 V for logic "1"-30 To +3 V for logic "0"Max. input current: 8 mA | 802.11b: typically 23±1.5 dBm at 1 to 11 MBit/s, 802.11g: typically 20±1.5 dBm at 6 to 24 MBit/s, 19±1.5 dBm at 36 MBit/s, 18±1.5 dBm at 48 MBit/s, 17±1.5 dBm at 54 MBit/s, 802.11a: typically 18±1.5 dBm at 6 to 24 MBit/s, 16±1.5 dBm at 36 to 48 MBit/s, 15±1.5 dBm at 54 MBit/s | EN 300 328, EN 301893 | RP-SMA (coupler) | DSSS with DBPSK, DQPSK, CCK, OFDM with BPSK, QPSK, 16QAM, 64QAM, 802.11b: CCK at 11/5.5 MBit/s, DQPSK at 2 MBit/s, DBPSK at 11 MBit/s, 802.11a / g: 64QAM at 54/48 MBit/s, 16QAM at 36/24 MBit/s, QPSK at 18/12 MBit/s, BPSK at 9/6 MBit/s | SNMP MIB file | 2 dBi omni-directional dual band antenna, RP-SMA (male plug) | - | - | - | - | - | - | - | - | |
| 10 | 1: ¥6,847.60 | IE-WLT-AP-BR-CL-ABG-US | 1 | Lead free / RoHS Compliant | IE-WLT-AP-BR-CL-ABG-US | EN 301 489-1/-17, FCC Part 15, Section B Class B, EN 55022/55024 | IP30 | DE_PN4800_160418_009.pdf | 19-17-02-01 | 105 mm | 53.6 mm | 135 mm | 850 g | 4.134 inch | 2.11 inch | 5.315 inch | metal | Hardware Installation Guide | * | 4050118076882 | Wireless Access Point/Bridge/Client, IEEE 802.11 a/b/g, US Model, IP30, -40 °C...75 °C | 5 to 95 % (non-condensing) | -40 °C | 19-17-02-01 | 75 °C | EN60950-1, UL60950-1 | IEEE 802.11a/b/g/h for Wireless LAN, IEEE 802.11i for Wireless Security, IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3af for Power-over-Ethernet, IEEE 802.1D for the Spanning Tree protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN tagging | 0.121 to 0.494 A at 12 to 48V DC, 0.3 A at 24V DC | Mounting rail | according to IEC 60068-2-27 | 10/100BaseT(X), auto negotiation | UL/cUL, Class I, Division 2, Groups A, B, C and D, ATEX Zone 2 Ex nA IIC T4 Gc | according to IEC 60068-2-6 | 392,209 hrs | EC000816 | 5 years | 12 to 48 V DC, redundant dual DC inputs or 48 V DC Power over Ethernet (IEEE 802.3af) | 1 removable 10-pole terminal block | EC000816 | PWR1, PWR2, PoE, FAULT, STATE, SIGNAL, CLIENT, BRIDGE, WLAN, 10M, 100M | 802.11b: -97 dBm at 1 MBit/s, -94 dBm at 2 MBit/s, -92 dBm at 5.5 MBit/s, -90 dBm at 11 MBit/s, 802.11g: -93 dBm at 6 MBit/s, -91 dBm at 9 Mbps, -90 dBm at 12 MBit/s, -88 dBm at 18 MBit/s, -84 dBm at 24 MBit/s, -80 dBm at 36 MBit/s, -76 dBm at 48 MBit/s, -74 dBm at 54 MBit/s, 802.11a: -90 dBm at 6 MBit/s, -89 dBm at 9 MBit/s, -89 dBm at 12 MBit/s, -85 dBm at 18 MBit/s, -83 dBm at 24 MBit/s, -79 dBm at 36 MBit/s, -75 dBm at 48 MBit/s, -74 dBm at 54 MBit/s | Available | 1 relay output with a current capacity of 1 A at 24 V DC | EU: 2.412 to 2.462 GHz (11 channels), 5.18 to 5.24 GHz (4 channels) | 802.11b: 1, 2, 5,5, 11 MBit/s, 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 MBit/s | Version 1.11.4 | WLAN Administration Tool | Manual | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 inputs with the same ground, isolated+13 To +30 V for logic "1"-30 To +3 V for logic "0"Max. input current: 8 mA | 802.11b: typically 23±1.5 dBm at 1 to 11 MBit/s, 802.11g: typically 20±1.5 dBm at 6 to 24 MBit/s, 19±1.5 dBm at 36 MBit/s, 18±1.5 dBm at 48 MBit/s, 17±1.5 dBm at 54 MBit/s, 802.11a: typically 18±1.5 dBm at 6 to 24 MBit/s, 16±1.5 dBm at 36 to 48 MBit/s, 15±1.5 dBm at 54 MBit/s | EN 300 328, EN 301893 | RP-SMA (coupler) | DSSS with DBPSK, DQPSK, CCK, OFDM with BPSK, QPSK, 16QAM, 64QAM, 802.11b: CCK at 11/5.5 MBit/s, DQPSK at 2 MBit/s, DBPSK at 11 MBit/s, 802.11a / g: 64QAM at 54/48 MBit/s, 16QAM at 36/24 MBit/s, QPSK at 18/12 MBit/s, BPSK at 9/6 MBit/s | SNMP MIB file | 2 dBi omni-directional dual band antenna, RP-SMA (male plug) | - | - | - | - | - | - | - | - |
第 1 / 1 页
1