- 首页
- 制造商
- Schneider Electric SE
交流叠片式电磁铁
Schneider Electric SE- 交流叠片式电磁铁
03
交流叠片式电磁铁 - 型号列表
共 1,001 个型号| 制造商零件编号 | 库存 | 价格 | 交货时间 | 子类别 | 行业别名 | 产品子类型 | 测量范围 | 设备简称 | 额定电压 | 深度 | 宽度 | 重量 | 安装类型 | 防护等级 | 工作温度 | 标准 | 认证 | 最大功耗 | 击穿电压（V(BR)GSS） | 用途 | 其他规格 | 存储接口 | 工作压力 | 防护处理 | 系列 | 供电电压 | 额定输出功率 | 应用细节 | 自然散热热阻 | 类型 | 适用产品/相关产品 | 极数 | 最小供电电压 | 长度 | 第一连接器 | 热电流 (Ith) | 兼容性 | 输出类型 | 输入数量 | 输出数量 | 电路 | I/O电压 | 输出电流 | 阻抗 - 不平衡/平衡 | 滑臂电阻（欧姆）（典型） | ESR（等效串联电阻） | 共模瞬态抗扰度（最小） | 绝缘直径 | 动作时间 | 抗冲击能力 | 抗振性 | 频率 | 隔离 | UL电压 | 工作频率 | 高度 | 最大瞬时扭矩（oz-in / mNm） | 机械寿命 | 输入类型 | 显示类型 | 最大额定电流 | 故障保护 | 负载类型 | 跳闸范围 | 功能 | 占空比 | 跳闸状态 | 占空比（最大） | 跳闸电流 | 安装特性 | 控制方式 | 电气寿命 | 网络技术 | 附件类型 | 单元数量 | 产品特性 | 触头类型 | 持续时间 | 成分 | 可充电 | 额定功率 | 保护特性 | 额定电压值 | 过载保护 | 保护电压（VP）（2416） | 连接器类型 | 总宽度 | 尺寸/外形 | CAD图纸 | 输出1频率 | 电机类型 | RoHS | 控制/显示类型 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Controllers ZELIO LOGIC 2 ZELIOCOM CABLE Schneider Electric 电缆 , 使用于Zelio Logic 2 Schneider Electric | 10 | 1: ¥823.276 | 14 Days | Not Specified | 785901749011 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Zelio Logic 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 电缆 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Controllers MAN-START 600VAC 0.40AMP IEC Motor breaker Schneider Electric component GV2ME03: TeSys GV2-Circuit breaker-thermal-magnetic- 0.25...0.40 A -screw clamp terminals Motor protection switch, GV2ME03, Schneider Electric Schneider Electric TeSys GV GV2M 系列 0.25 → 0.4 A 3极 电动机保护断路器 , 690 V Schneider Electric | 10 | 1: ¥1,055.768 | 14 Days | Circuit Breaker | 785901211907, GV2ME03 | Circuit breaker | TeSys GV2 | GV2ME | 690 V AC 50/60 Hz conforming to IEC 60947-2 | 78.2 mm | 45 mm | 0.23 kg | By clipsBy screws | IP20 conforming to IEC 60529 | -20...60 °C | CSA C22-2EN 60204IEC 60947-1IEC 60947-2IEC 60947-4-1NF C 63-120NF C 63-650NF C 79-130UL 508VDE 0113VDE 0660 | ATEXBVCCCCEBECCSADNVEZUGLGOSTRINASETITSEULLROS | 2.5 W | 6 kV conforming to IEC 60947-2 | AC-3 conforming to IEC 60947-4-1Category A conforming to IEC 60947-2 | 960 °C conforming to IEC 60695-2-1 | -40...80 °C | 2000 m | TH | GV2M | - | 0.09 kW at 400/415 V AC 50/60 Hz | Motor protection | 0.25...0.4 A | - | - | 3P | Icu = 100 kA at 230/240 V AC 50/60 Hz conforming to IEC 60947-2Icu = 100 kA at 400/415 V AC 50/60 Hz conforming to IEC 60947-2Icu = 100 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2Icu = 100 kA at 500 V AC 50/60 Hz conforming to IEC 60947-2Icu = 100 kA at 690 V AC 50/60 Hz conforming to IEC 60947-2 | 89mm | Screw clamp terminals 2 cable(s) 1...6 mm ² - cable stiffness : solidScrew clamp terminals 2 cable(s) 1.5...6 mm ² - cable stiffness : flexible - without cable endScrew clamp terminals 2 cable(s) 1...4 mm ² - cable stiffness : flexible - with cable end | 0.4 A conforming to IEC 60947-4-1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50/60 Hz conforming to IEC 60947-4-1 | Yes conforming to IEC 60947-1 | 690 V AC 50/60 Hz conforming to IEC 60947-2 | 25 cyc/h | 89 mm | 1.7 N.m - on screw clamp terminals | Vibrations 5 Gn, 5...150 Hz conforming to IEC 60068-2-6Shocks 30 Gn for 11 ms conforming to IEC 60068-2-27 | - | - | 0.25 → 0.4 A | - | - | - | - | Yes conforming to IEC 60947-4-1 | Thermal-magnetic | Continuous conforming to IEC 60947-4-1 | 5 A | HorizontalVertical | Pushbutton | 100000 cycles for AC-3 at 440 V | AC | - | 1 | - | - | - | - | - | - | motor breaker | 690 V | 0.25...0.4 A | IP 2X | 螺钉 | 45 x 89 x 78 mm | 89 x 44.5 x 78.2 mm | 3D CAD 模型 | - | - | - | - |
 Controllers MAN-START 600VAC 0.40AMP IEC Schneider Electric component GV2ME033: TeSys GV2-Circuit breaker-thermal-magnetic- 0.25...0.40 A - spring terminals Schneider Electric | 10 | 1: ¥967.096 | 14 Days | Circuit Breaker | 785901212096, GV2ME033 | Circuit breaker | TeSys GV2 | GV2ME | 690 V AC 50/60 Hz conforming to IEC 60947-2 | 78.2 mm | 45 mm | 0.28 kg | By clipsBy screws | IP20 conforming to IEC 60529 | -20...60 °C | CSA C22-2EN 60204IEC 60947-1IEC 60947-2IEC 60947-4-1NF C 63-120NF C 63-650NF C 79-130UL 508VDE 0113VDE 0660 | ATEXBVCCCCEBECCSADNVEZUGLGOSTRINASETITSEULLROS | 2.5 W | 6 kV conforming to IEC 60947-2 | AC-3 conforming to IEC 60947-4-1Category A conforming to IEC 60947-2 | 960 °C conforming to IEC 60695-2-1 | -40...80 °C | 2000 m | TH | - | - | 0.09 kW at 400/415 V AC 50/60 Hz | Motor protection | 0.25...0.4 A | - | - | 3P | Icu = 100 kA at 230/240 V AC 50/60 Hz conforming to IEC 60947-2Icu = 100 kA at 400/415 V AC 50/60 Hz conforming to IEC 60947-2Icu = 100 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2Icu = 100 kA at 500 V AC 50/60 Hz conforming to IEC 60947-2Icu = 100 kA at 690 V AC 50/60 Hz conforming to IEC 60947-2 | - | Spring terminals 2 cable(s) 1...6 mm ² - cable stiffness : solidSpring terminals 2 cable(s) 1.5...4 mm ² - cable stiffness : flexible - without cable end | 0.4 A conforming to IEC 60947-4-1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50/60 Hz conforming to IEC 60947-4-1 | Yes conforming to IEC 60947-1 | 690 V AC 50/60 Hz conforming to IEC 60947-2 | 25 cyc/h | 101 mm | - | Vibrations 5 Gn, 5...150 Hz conforming to IEC 60068-2-6Shocks 30 Gn for 11 ms conforming to IEC 60068-2-27 | - | - | - | - | - | - | - | Yes conforming to IEC 60947-4-1 | Thermal-magnetic | Continuous conforming to IEC 60947-4-1 | 5 A | HorizontalVertical | Pushbutton | 100000 cycles for AC-3 at 440 V | AC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Controllers MAN-START 600VAC 40AMP IEC Schneider Electric component GV3P13: TeSys GV3 - Circuit breaker - thermal-magnetic - 9â Schneider Electric | 10 | 1: ¥2,320.772 | 20 Days | Circuit Breaker | 785901492214, GV3P13 | Circuit breaker | TeSys GV3 | GV3P | 690 V AC 50/60 Hz conforming to IEC 60947-2 | 136 mm | 55 mm | 0.96 kg | By clipsBy screws | IP20 conforming to IEC 60529 | -20...60 °C | CSA C22-2 No 14-05 type EEN/IEC 60947-1EN/IEC 60947-2EN/IEC 60947-4-1UL 508 type E | ATEXBVCCCCSADNVGLGOSTLROS (pending)RINAUL | 8 W | 6 kV conforming to IEC 60947-2 | AC-3 conforming to IEC 60947-4-1Category A conforming to IEC 60947-2 | 960 °C conforming to IEC 60695-2-1 | -40...80 °C | 3000 m | TH | - | - | 11 kW at 690 V AC 50/60 Hz7.5 kW at 500 V AC 50/60 Hz5.5 kW at 400/415 V AC 50/60 Hz | Motor protection | 9...13 A | - | - | 3P | Icu = 50 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2Icu = 6 kA at 690 V AC 50/60 Hz conforming to IEC 60947-2Icu = 100 kA at 230/240 V AC 50/60 Hz conforming to IEC 60947-2Icu = 100 kA at 400/415 V AC 50/60 Hz conforming to IEC 60947-2Icu = 12 kA at 500 V AC 50/60 Hz conforming to IEC 60947-2 | - | EverLink BTR screw connectors 2 cable(s) 1...25 mm ² - cable stiffness : solidEverLink BTR screw connectors 2 cable(s) 1...25 mm ² - cable stiffness : flexible - without cable endEverLink BTR screw connectors 2 cable(s) 1...25 mm ² - cable stiffness : flexible - with cable end | 13 A conforming to IEC 60947-4-1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50/60 Hz conforming to IEC 60947-4-1 | Yes conforming to IEC 60947-1 | 690 V AC 50/60 Hz conforming to IEC 60947-2 | 25 cyc/h | 132 mm | 5 N.m - on EverLink BTR screw connectors- cable 25 mm ²5...8 N.m - on EverLink BTR screw connectors- cable 35 mm ² | Shocks closed 15 Gn for 11 ms conforming to IEC 60068-2-27Shocks opened 30 Gn for 11 ms conforming to IEC 60068-2-27Vibrations 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 | - | - | - | - | - | - | - | Yes conforming to IEC 60947-4-1 | Thermal-magnetic | Continuous conforming to IEC 60947-4-1 | 182 A | HorizontalVertical | Rotary knob | 50000 cycles for AC-3 at 440 V In | AC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Controllers U-LINE LIMITER ISOLATOR MODULE 施耐德(SCHNEIDER) 直流调速器附件 Schneider Electric component LUALB1: limiter disconnector LUA Schneider Electric | 10 | 1: ¥711.62 | 14 Days | Power Misc | 785901291817, LUALB1 | Limiter disconnector | TeSys U | LUA | 690 V conforming to EN 60947-1690 V conforming to IEC 60947-1 | - | - | - | Direct | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 70 kA at 690 V130 kA | - | Connector 1 cable 1...10 mm ² - cable stiffness: flexible - without cable endConnector 1 cable 1...6 mm ² - cable stiffness: flexible - with cable endConnector 1 cable 1.5...10 mm ² - cable stiffness: solid -Connector 2 cable 1...6 mm ² - cable stiffness: flexible - with cable endConnector 2 cable 1...6 mm ² - cable stiffness: flexible - without cable endConnector 2 cable 1.5...6 mm ² - cable stiffness: solid - | 32 A | LU2BLUB | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.9...2.5 N.m - with screwdriver flat | - | - | - | 50 kA | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Controllers MAN-START IP55 IEC SEALING KIT Schneider Electric component GV2E01: TeSys GV2 - sealing kit - IP55 - operational temperature > 5 °C Schneider Electric | 32 | 1: ¥146.608 | 14 Days | Component Kits | 785901873150 | Sealing kit | TeSys GV2 | GV2E | - | - | - | 0.012 kg | - | IP55 | 5...40 °C | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | For enclosures and front plate | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Enclosure accessory | Set of 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 | 10 | 1: ¥1,169.6986 | 14 Days | Not Specified | 785901685210 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Controllers Zelio SR3 expansion Module 10 I-O 24VAC Schneider Electric SR3B-B 智能继电器 逻辑控制, 6 x 输入, 4 x 输出, 输入/输出 Schneider Electric | 10 | 1: ¥781.728 | 14 Days | I/O Module | 785901693840, SR3XT101B | - | - | - | - | 59.5mm | 72mm | - | - | - | - | - | - | - | - | - | - | - | - | - | SR3B-B 智能继电器 | - | - | - | - | 输入/输出 | SR3B-B | - | - | 110mm | - | - | - | 继电器 | 6 | 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 分立元件 | 否 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Controllers Zelio SR3 expansion Module 10 I-O 24VAC 施耐德(SCHNEIDER) PLC本体 Schneider Electric SR3B-FU 智能继电器 逻辑控制, 6 x 输入, 4 x 输出, 输入/输出 Schneider Electric | 10 | 1: ¥781.728 | 14 Days | I/O Module | 785901693819, SR3XT101FU | - | - | - | - | 59.5mm | 72mm | - | Screw | - | - | - | - | - | - | - | - | - | - | - | SR3 | 100 V to 240 V | - | - | - | Extension Module | SR3B-B | - | - | 110mm | - | - | - | Relay | 6 | 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 分立元件 | 否 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Discrete I/O extension module for Zelio Logic | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Controllers ZELIO SR3 10 I-O 12VDC, RELAY OUT Schneider Electric Zelio Logic 2 逻辑控制, 6 x 输入, 4 x 输出, 输入/输出 Schneider Electric | 10 | 1: ¥615.50 | 14 Days | I/O Module | 785901626602, SR3XT101JD | - | - | - | - | 59.5mm | 72mm | - | - | - | - | - | - | - | - | - | - | - | - | - | Zelio Logic 2 | - | - | - | - | 输入/输出 | Zelio 2 | - | - | 107.6mm | - | - | - | 继电器 | 6 | 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 分立元件 | 否 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Controllers Zelio SR3 expansion Module 14 I-O 24VAC 施耐德(SCHNEIDER) PLC本体 Schneider Electric SR3B-B 智能继电器 逻辑控制, 8 x 输入, 6 x 输出, 输入/输出 Schneider Electric | 10 | 1: ¥594.26 | 14 Days | I/O Module | 785901422587, SR3XT141B | - | - | - | - | 59.5mm | 72mm | - | - | - | - | - | - | - | - | - | - | - | - | - | SR3B-B 智能继电器 | - | - | - | - | 输入/输出 | SR3B-B | - | - | 110mm | - | - | - | 继电器 | 8 | 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 分立元件 | 否 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Controllers ZELIO SR3 14 I-O 12VDC, RELAY OUT Schneider Electric Zelio Logic 2 逻辑控制, 8 x 输入, 6 x 输出, 输入/输出 Schneider Electric | 10 | 1: ¥602.35 | 14 Days | I/O Module | 785901471097, SR3XT141JD | - | - | - | - | 59.5mm | 72mm | - | - | - | - | - | - | - | - | - | - | - | - | - | Zelio Logic 2 | - | - | - | - | 输入/输出 | Zelio 2 | - | - | 107.6mm | - | - | - | 继电器 | 8 | 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 分立元件 | 否 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| 10 | 1: ¥657.696 | 14 Days | I/O Module | 785901693833, SR3XT61B | - | - | - | - | - | - | - | Screw | - | - | - | - | - | - | - | - | - | - | - | SR3 | 24 VDC | - | - | - | Extension Module | - | - | - | - | - | - | - | Relay | 4 | 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Discrete I/O extension module for Zelio Logic | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| 10 | 1: ¥513.808 | 14 Days | I/O Module | 785901466710, SR3XT61JD | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Controllers 32A SELF-PR.REV.STR W/TERMS- LUC*B Schneider Electric component LU2B32B: power base - TeSys U - 32 A - 24 V AC screw clamps control Schneider Electric | 10 | 1: ¥3,870.356 | 14 Days | Solid State Relay | 785901202554, LU2B32B | Reversing power base | TeSys U | LU2B | 600 V conforming to CSA C22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 3 | 126 mm | 45 mm | 1.27 kg | - | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | ABSASEFAATEXBVCCCCSADNVGLGOSTLROS (Lloyds register of shipping)UL | 3 W for control circuit with LUCA, LUCB, LUCC, LUCD1.8 W for control circuit with LUCM | 6 kV conforming to IEC 60947-6-2 | AC-41AC-43AC-44 | 650 °C conforming to IEC 60695-2-12960 °C parts supporting live components conforming to IEC 60695-2-12 | -40...85 °C | 2000 m | TH conforming to IEC 60068 | - | 14.5 V 24 V AC drop-out20...26.5 V 24 V AC in operation | - | - | - | - | - | 3P | 10 kA 500 V4 kA 690 V50 kA 230 V50 kA 440 V | - | Control circuit: screw clamp terminals 1 cable 0.34...1.5 mm ² - cable stiffness: flexible - with cable endControl circuit: screw clamp terminals 1 cable 0.75...1.5 mm ² - cable stiffness: flexible - without cable endControl circuit: screw clamp terminals 1 cable 0.75...1.5 mm ² - cable stiffness: rigid - without cable endControl circuit: screw clamp terminals 2 cable 0.34...1.5 mm ² - cable stiffness: flexible - with cable endControl circuit: screw clamp terminals 2 cable 0.75...1.5 mm ² - cable stiffness: flexible - without cable endControl circuit: screw clamp terminals 2 cable 0.75...1.5 mm ² - cable stiffness: rigid - without cable endPower circuit: screw clamp terminals 1 cable 1...10 mm ² - cable stiffness: rigid - without cable endPower circuit: screw clamp terminals 1 cable 1...6 mm ² - cable stiffness: flexible - with cable endPower circuit: screw clamp terminals 1 cable 2.5...10 mm ² - cable stiffness: flexible - without cable endPower circuit: screw clamp terminals 2 cable 1...6 mm ² - cable stiffness: flexible - with cable endPower circuit: screw clamp terminals 2 cable 1...6 mm ² - cable stiffness: rigid - without cable endPower circuit: screw clamp terminals 2 cable 1.5...6 mm ² - cable stiffness: flexible - without cable end | 32 A | - | - | - | - | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1 appendix N400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 appendix N | 70 % 500 ms conforming to IEC 61000-4-11 | 220 mA at 24 V AC I maximum while closing90 mA at 24 V AC I rms sealed | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 10 V conforming to IEC 61000-4-6 | 150 ms with change of direction for power circuit35 ms opening for control circuit70 ms closing for control circuit75 ms without change of direction for power circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-274 gn 5...300 Hz power poles closed conforming to IEC 60068-2-27 | 40...60 Hz | Yes | 230 V440 V500 V690 V | 60 cyc/mn | 224 mm | Control circuit: 0.8...1.2 N.m - with screwdriver 5 mm flatControl circuit: 0.8...1.2 N.m - with screwdriver 5 mm Philips no 1Power circuit: 1.9...2.5 N.m - with screwdriver 6 mm flatPower circuit: 1.9...2.5 N.m - with screwdriver 6 mm Philips No 2 | 15000000 cycles | - | - | 21 A at 690 V23 A at 500 V32 A at <= 440 V | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Type linked contacts (1 NO + 1 NC) conforming to IEC 60947-4-1Type mirror contact (1 NC) state of the power conforming to draft IEC 60947-1 | 25 ms for AC network 50/60 Hz | 2 NO | 1369863 cycles20000000 cycles | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Controllers 32A SELF-PR.REV.STR W/TERMS- LUC*ES Schneider Electric component LU2B32ES: power base - TeSys U - 32 A - 48...72 V DC screw clamps control Schneider Electric | 10 | 1: ¥3,870.356 | 14 Days | Solid State Relay | 785901202578, LU2B32ES | Reversing power base | TeSys U | LU2B | 600 V conforming to CSA C22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 3 | 126 mm | 45 mm | 1.27 kg | - | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | ABSASEFAATEXBVCCCCSADNVGLGOSTLROS (Lloyds register of shipping)UL | 3 W for control circuit with LUCA, LUCB, LUCC, LUCD1.8 W for control circuit with LUCM | 6 kV conforming to IEC 60947-6-2 | AC-41AC-43AC-44 | 650 °C conforming to IEC 60695-2-12960 °C parts supporting live components conforming to IEC 60695-2-12 | -40...85 °C | 2000 m | TH conforming to IEC 60068 | - | 29 V 48 V AC drop-out29 V 48...72 V DC drop-out38.5...72 V 48 V AC in operation38.5...93 V 48...72 V DC in operation | - | - | - | - | - | 3P | 10 kA 500 V4 kA 690 V50 kA 230 V50 kA 440 V | - | Control circuit: screw clamp terminals 1 cable 0.34...1.5 mm ² - cable stiffness: flexible - with cable endControl circuit: screw clamp terminals 1 cable 0.75...1.5 mm ² - cable stiffness: flexible - without cable endControl circuit: screw clamp terminals 1 cable 0.75...1.5 mm ² - cable stiffness: rigid - without cable endControl circuit: screw clamp terminals 2 cable 0.34...1.5 mm ² - cable stiffness: flexible - with cable endControl circuit: screw clamp terminals 2 cable 0.75...1.5 mm ² - cable stiffness: flexible - without cable endControl circuit: screw clamp terminals 2 cable 0.75...1.5 mm ² - cable stiffness: rigid - without cable endPower circuit: screw clamp terminals 1 cable 1...10 mm ² - cable stiffness: rigid - without cable endPower circuit: screw clamp terminals 1 cable 1...6 mm ² - cable stiffness: flexible - with cable endPower circuit: screw clamp terminals 1 cable 2.5...10 mm ² - cable stiffness: flexible - without cable endPower circuit: screw clamp terminals 2 cable 1...6 mm ² - cable stiffness: flexible - with cable endPower circuit: screw clamp terminals 2 cable 1...6 mm ² - cable stiffness: rigid - without cable endPower circuit: screw clamp terminals 2 cable 1.5...6 mm ² - cable stiffness: flexible - without cable end | 32 A | - | - | - | - | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1 appendix N400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 appendix N | 70 % 500 ms conforming to IEC 61000-4-11 | 280 mA at 48...72 V AC I maximum while closing280 mA at 48...72 V DC I maximum while closing35 mA at 48...72 V AC I rms sealed35 mA at 48...72 V DC I rms sealed | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 10 V conforming to IEC 61000-4-6 | 150 ms with change of direction for power circuit35 ms opening for control circuit60 ms closing for control circuit75 ms without change of direction for power circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-274 gn 5...300 Hz power poles closed conforming to IEC 60068-2-27 | 40...60 Hz | Yes | 230 V440 V500 V690 V | 60 cyc/mn | 224 mm | Control circuit: 0.8...1.2 N.m - with screwdriver 5 mm flatControl circuit: 0.8...1.2 N.m - with screwdriver 5 mm Philips no 1Power circuit: 1.9...2.5 N.m - with screwdriver 6 mm flatPower circuit: 1.9...2.5 N.m - with screwdriver 6 mm Philips No 2 | 15000000 cycles | - | - | 21 A at 690 V23 A at 500 V32 A at <= 440 V | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Type linked contacts (1 NO + 1 NC) conforming to IEC 60947-4-1Type mirror contact (1 NC) state of the power conforming to draft IEC 60947-1 | 15 ms for DC network25 ms for AC network 50/60 Hz | 2 NO | 1369863 cycles20000000 cycles | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Controllers STD CNTRL UNIT CL10 3PH .3-1.4A 48-72V Schneider Electric component LUCA1XES: standard control unit LUCA - class 10 - 0.35...1.4 A - 48...72 V DC/AC Schneider Electric LUC 系列 0.25 kW 3P DOL 启动器, 440 V 交流, 3相, IP40 Schneider Electric | 10 | 1: ¥796.03 | 14 Days | Solid State Relay | 785901701859, LUCA1XES | Standard control unit | TeSys U | LUCA | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | - | - | 0.135 kg | Plug-in | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | ABSASEFAATEXBVCCCCSADNVGLGOSTLROS (Lloyds register of shipping)UL | 2 W for control circuit with LUB123 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | AC-41AC-43AC-44 | 650 °C conforming to IEC 60695-2-12960 °C parts supporting live components conforming to IEC 60695-2-12 | -40...85 °C | 2000 m | TH conforming to IEC 60068 | LUC | 38.5...72 V for AC circuit 48 V in operation38.5...93 V for DC circuit 48...72 V in operation | 0.25 kW at 400...440 V AC 50/60 Hz | Basic protection requirements for motor starters: overload and short-circuit | 0.35...1.4 A | - | - | 3P | - | - | - | - | ASILUFC5ASILUFC51LUFC00LUFN..LULC031LULC033LULC07LULC08LULC09LULC15 | - | - | - | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 70 % 500 ms conforming to IEC 61000-4-11 | 280 mA at 48 V AC I maximum while closing with LUB12280 mA at 48 V AC I maximum while closing with LUB32280 mA at 48...72 V DC I maximum while closing with LUB12280 mA at 48...72 V DC I maximum while closing with LUB3235 mA at 48 V AC I rms sealed with LUB1235 mA at 48...72 V DC I rms sealed with LUB1245 mA at 48 V AC I rms sealed with LUB3245 mA at 48...72 V DC I rms sealed with LUB32 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 10 V conforming to IEC 61000-4-6 | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit60 ms closing with LUB12 for control circuit60 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | - | - | - | - | - | - | - | - | - | - | Class 10 - frequency limit: 40...60 Hz - temperature compensation: -25...70 °C - conforming to IEC 60947-6-2Class 10 - frequency limit: 40...60 Hz - temperature compensation: -25...70 °C - conforming to UL 508 | 3-phase motor - cooling: self-cooled | 14.2 x Ir +/- 20 % | Earth fault protectionManual resetProtection against overload and short-circuitProtection against phase failure and phase imbalance | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.25 kW | - | - | - | - | - | - | - | - | 3 | DOL | - | - |
 Controllers ADV CNTRL UNIT CL10 1PH 4.5-18A 24V Schneider Electric component LUCC18B: advanced control unit LUCC - class 10 - 4.5...18 A - 24 V AC Schneider Electric | 10 | 1: ¥912.356 | 14 Days | Solid State Relay | 785901222736, LUCC18B | Advanced control unit | TeSys U | LUCC | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | - | - | 0.14 kg | Plug-in | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | ABSASEFAATEXBVCCCCSADNVGLGOSTLROS (Lloyds register of shipping)UL | 3 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | AC-41AC-43AC-44 | 650 °C conforming to IEC 60695-2-12960 °C parts supporting live components conforming to IEC 60695-2-12 | -40...85 °C | 2000 m | TH conforming to IEC 60068 | - | 20...26.5 V for AC circuit 24 V in operation | 4 kW at 400...440 V AC 50/60 Hz | Basic protection and advanced functions, communication | 4.5...18 A | - | - | - | - | - | - | - | ASILUFC5ASILUFC51LUFC00LUFDA01LUFDA10LUFDH11LUFN..LUFV2LUFW10LULC031LULC033LULC07LULC08LULC09LULC15 | - | - | - | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 70 % 500 ms conforming to IEC 61000-4-11 | 140 mA at 24 V AC I maximum while closing with LUB12220 mA at 24 V AC I maximum while closing with LUB3270 mA at 24 V AC I rms sealed with LUB1290 mA at 24 V AC I rms sealed with LUB32 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 10 V conforming to IEC 61000-4-6 | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | - | - | - | - | - | - | - | - | - | - | Class 10 - frequency limit: 40...60 Hz - temperature compensation: -25...55 °C - conforming to IEC 60947-6-2Class 10 - frequency limit: 40...60 Hz - temperature compensation: -25...55 °C - conforming to UL 508 | Single-phase motor | 14.2 x Ir +/- 20 % | Earth fault protectionManual resetProtection against overload and short-circuitProtection against phase failure and phase imbalance | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Controllers ADV CNTRL UNIT CL10 1PH 4.5-18A 24VDC Schneider Electric component LUCC18BL: advanced control unit LUCC - class 10 - 4.5...18 A - 24 V DC Schneider Electric | 10 | 1: ¥912.356 | 14 Days | Solid State Relay | 785901550716, LUCC18BL | Advanced control unit | TeSys U | LUCC | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | - | - | 0.14 kg | Plug-in | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | ABSASEFAATEXBVCCCCSADNVGLGOSTLROS (Lloyds register of shipping)UL | 3 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | AC-41AC-43AC-44 | 650 °C conforming to IEC 60695-2-12960 °C parts supporting live components conforming to IEC 60695-2-12 | -40...85 °C | 2000 m | TH conforming to IEC 60068 | - | 20...27 V for DC circuit 24 V in operation | 4 kW at 400...440 V AC 50/60 Hz | Basic protection and advanced functions, communication | 4.5...18 A | - | - | - | - | - | - | - | ASILUFC5ASILUFC51LUFC00LUFDA01LUFDA10LUFDH11LUFN..LUFV2LUFW10LULC031LULC033LULC07LULC08LULC09LULC15 | - | - | - | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 70 % 500 ms conforming to IEC 61000-4-11 | 130 mA at 24 V DC I maximum while closing with LUB12220 mA at 24 V DC I maximum while closing with LUB3260 mA at 24 V DC I rms sealed with LUB1280 mA at 24 V DC I rms sealed with LUB32 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 10 V conforming to IEC 61000-4-6 | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | - | - | - | - | - | - | - | - | - | - | Class 10 - frequency limit: 40...60 Hz - temperature compensation: -25...55 °C - conforming to IEC 60947-6-2Class 10 - frequency limit: 40...60 Hz - temperature compensation: -25...55 °C - conforming to UL 508 | Single-phase motor | 14.2 x Ir +/- 20 % | Earth fault protectionManual resetProtection against overload and short-circuitProtection against phase failure and phase imbalance | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 3-phase motor control unit,24Vdc Controllers ADV CNTRL UNIT CL20 3PH 3-12A 24VDC 施耐德(SCHNEIDER) 接触器附件 Schneider Electric component LUCD12BL: advanced control unit LUCD - class 20 - 3...12 A - 24 V DC Schneider Electric | 10 | 1: ¥357.204 | 14 Days | Solid State Relay | 785901269601, LUCD12BL | Advanced control unit | TeSys U | LUCD | 600 V conforming to CSA 22-2 No 14600 V conforming to UL 508690 V conforming to IEC 60947-1 | - | - | 0.14 kg | Plug-in | IP20 front panel and wired terminals conforming to IEC 60947-1IP20 other faces conforming to IEC 60947-1IP40 front panel outside connection zone conforming to IEC 60947-1 | -25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD | CSA C22-2 No 14 type EEN 60947-6-2IEC 60947-6-2UL 508 type E with phase barrier | ABSASEFAATEXBVCCCCSADNVGLGOSTLROS (Lloyds register of shipping)UL | 2 W for control circuit with LUB123 W for control circuit with LUB32 | 6 kV conforming to IEC 60947-6-2 | AC-41AC-43AC-44 | 3 → 12 A | -40...85 °C | 2000 m | TH conforming to IEC 60068 | - | 20...27 V for DC circuit 24 V in operation | 9 kW at 690 V AC 50/60 Hz5.5 kW at 400...440 V AC 50/60 Hz5.5 kW at 500 V AC 50/60 Hz | Basic protection and advanced functions, communication | 3...12 A | Advanced Control Unit | - | - | - | - | - | - | ASILUFC5ASILUFC51LUFC00LUFDA01LUFDA10LUFDH11LUFN..LUFV2LUFW10LULC031LULC033LULC07LULC08LULC09LULC15 | - | - | - | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 | 70 % 500 ms conforming to IEC 61000-4-11 | 130 mA at 24 V DC I maximum while closing with LUB12220 mA at 24 V DC I maximum while closing with LUB3260 mA at 24 V DC I rms sealed with LUB1280 mA at 24 V DC I rms sealed with LUB32 | 10 V/m 3 conforming to IEC 61000-4-3 | 8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2 | 2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 | 3 ms | 10 V conforming to IEC 61000-4-6 | 35 ms opening with LUB12 for control circuit35 ms opening with LUB32 for control circuit70 ms closing with LUB12 for control circuit70 ms closing with LUB32 for control circuit | 10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27 | 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-64 gn 5...300 Hz power poles closed conforming to IEC 60068-2-6 | - | - | - | - | - | - | - | - | - | - | Class 20 - frequency limit: 40...60 Hz - temperature compensation: -25...70 °C - conforming to IEC 60947-6-2Class 20 - frequency limit: 40...60 Hz - temperature compensation: -25...70 °C - conforming to UL 508 | 3-phase motor - cooling: self-cooled | 14.2 x Ir +/- 20 % | Earth fault protectionManual resetProtection against overload and short-circuitProtection against phase failure and phase imbalance | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 9 kW | - | - | - | - | - | - | - | - | - | - | Compliant | 24 V dc |
第 1 / 50 页
1